Re: [etherlab-users] API for enabling/disabling sync managers of a slave

[Gavin Lambert]

That looks fine as far as it goes, but you do need to run the cyclic loop after 
calling ecrt_master_activate.  That kicks off the configuration process but it 
requires several cycles to complete and actually transition the slaves to OP.

And once your application exits, the master will automatically deactivate and 
return the slaves to PREOP.

From: Mohsen Alizadeh Noghani <m.aliza...@gmail.com>
Sent: Monday, 1 October 2018 22:09
To: Gavin Lambert <gavin.lamb...@tomra.com>; etherlab-users@etherlab.org
Subject: Re: [etherlab-users] API for enabling/disabling sync managers of a 
slave


I still haven't been able to enable sync managers (and thus change the state to 
SAFEOP)
Currently, I'm executing this 
code<https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fmohse-n%2FL7N_EtherLab%2Fblob%2Fmaster%2Fsimple_test.c&data=02%7C01%7Cgavin.lambert%40tomra.com%7Cde4676633de44877b14b08d6277d949a%7C4308d118edd143008a37cfeba8ad5898%7C0%7C0%7C636739817661893040&sdata=L9ZYnno%2FqdrZNpqI7Zp02Xglc8dUybnVKy%2BnXniYeik%3D&reserved=0>,
 which is basically the user example.
Output of $ethercat xml of the slave is:

<?xml version="1.0" ?>
<EtherCATInfo>
  <!-- Slave 0 -->
  <Vendor>
    <Id>30101</Id>
  </Vendor>
  <Descriptions>
    <Devices>
      <Device>
        <Type ProductCode="#x00000000" RevisionNo="#x00000002">L7N</Type>
        <Name><![CDATA[L7N]]></Name>
        <Sm Enable="1" StartAddress="#x1000" ControlByte="#x26" 
DefaultSize="128" />
        <Sm Enable="1" StartAddress="#x1400" ControlByte="#x22" 
DefaultSize="128" />
        <Sm Enable="0" StartAddress="#x1800" ControlByte="#x24" DefaultSize="0" 
/>
        <Sm Enable="0" StartAddress="#x1c00" ControlByte="#x20" DefaultSize="0" 
/>
        <RxPdo Sm="2" Fixed="1" Mandatory="1">
          <Index>#x1601</Index>
          <Name>2nd Receive PDO Mapping</Name>
          <Entry>
            <Index>#x6040</Index>
            <SubIndex>0</SubIndex>
            <BitLen>16</BitLen>
            <Name>Controlword</Name>
            <DataType>UINT16</DataType>
          </Entry>
          <Entry>
            <Index>#x607a</Index>
            <SubIndex>0</SubIndex>
            <BitLen>32</BitLen>
            <Name>Target Position</Name>
            <DataType>UINT32</DataType>
          </Entry>
        </RxPdo>
        <TxPdo Sm="3" Fixed="1" Mandatory="1">
          <Index>#x1a01</Index>
          <Name>2nd Transmit PDO Mapping</Name>
          <Entry>
            <Index>#x6041</Index>
            <SubIndex>0</SubIndex>
            <BitLen>16</BitLen>
            <Name>Statusword</Name>
            <DataType>UINT16</DataType>
          </Entry>
          <Entry>
            <Index>#x6064</Index>
            <SubIndex>0</SubIndex>
            <BitLen>32</BitLen>
            <Name>Position Actual Value</Name>
            <DataType>UINT32</DataType>
          </Entry>
        </TxPdo>
      </Device>
    </Devices>
  </Descriptions>
</EtherCATInfo>

On Wed, Sep 26, 2018 at 3:02 AM Gavin Lambert 
<gavin.lamb...@tomra.com<mailto:gavin.lamb...@tomra.com>> wrote:
You typically don’t need to explicitly disable a sync manager; you simply don’t 
refer to it or any PDOs it contains, and then it will not be included in the 
domain’s data.

Alternatively, you can configure the sync manager but then list zero PDOs for 
it, to explicitly set the PDO Assign register for that SM to 0 (for slaves that 
support flexible assignment).  Note that you should not enable the SM watchdog 
if you’re setting it to have zero PDOs.

It sounds like you should probably read the documentation for the EtherCAT 
protocol and for the Etherlab master in particular.

From: Mohsen Alizadeh Noghani 
<m.aliza...@gmail.com<mailto:m.aliza...@gmail.com>>
Sent: Wednesday, 26 September 2018 04:52
To: Gavin Lambert <gavin.lamb...@tomra.com<mailto:gavin.lamb...@tomra.com>>; 
etherlab-users@etherlab.org<mailto:etherlab-users@etherlab.org>
Subject: Re: [etherlab-users] API for enabling/disabling sync managers of a 
slave

Thanks Gavin.

1- Would
ecrt_slave_config_sync_manager(sc, 2, EC_DIR_OUTPUT, EC_WD_ENABLE )
enable Sync Manager 2 of slave sc?
2- How can I disable it then? I doesn't seems the function provides an option 
to enable/disable.

Best,
Mohsen


On Tue, Sep 25, 2018 at 2:40 AM, Gavin Lambert 
<gavin.lamb...@tomra.com<mailto:gavin.lamb...@tomra.com>> wrote:
You need to write an application, and then use ecrt_slave_config_sync_manager 
or ecrt_slave_config_pdos to configure the Sync Managers for each slave.

From: Mohsen Alizadeh Noghani
Sent: Tuesday, 25 September 2018 02:29
To: etherlab-users@etherlab.org<mailto:etherlab-users@etherlab.org>
Subject: [etherlab-users] API for enabling/disabling sync managers of a slave

Hello everyone.

Is there a function call that I can use for enabling a particular sync manager 
of a slave?
For example, I'd like to enable sync manager 2 of slave 1.

Best,
Mohsen


_______________________________________________
etherlab-users mailing list
etherlab-users@etherlab.org
http://lists.etherlab.org/mailman/listinfo/etherlab-users