Thanks Gavin, I delete the space after « = » and all is OK.
Have a nice day Vincent BUSSIERES Responsable Technique [cid:image001.png@01D53E4D.E60181C0] ----------------------------------- Tel : 33 (0)5.45.24.87.35 Fax : 33 (0)5.45.24.87.22 www.hemeria-group.com<http://www.hemeria-group.com/> Afin de contribuer au respect de l'environnement, merci de n'imprimer ce courriel qu'en cas de nécessité. Ce message et les fichiers pouvant être attachés sont confidentiels, réservés à l'usage unique des destinataires et n'engagent NEXEYA sous aucune forme que ce soit. This email and any files transmitted with it are confidential, intented solely for the unique use of the recipients and don't commit NEXEYA. De : Gavin Lambert <gavin.lamb...@tomra.com> Envoyé : jeudi 21 novembre 2019 01:22 À : BUSSIERES Vincent <vincent.bussie...@nexeya.com>; etherlab-users@etherlab.org Objet : RE: EtherCAT master command not found It sounds like you removed the = sign when you changed those lines. If in doubt, post the contents of /etc/ethercat.conf. Gavin Lambert Senior Software Developer [cid:image002.png@01D5A04E.D65251B0] [TOMRA]<http://www.compacsort.com>[Facebook]<https://www.facebook.com/Compacsort>[Linkedin]<https://www.linkedin.com/company/compac-sorting-equipment/>[Youtube]<https://vimeo.com/compacsort>[twitter]<https://twitter.com/compacsort>[instagram]<https://www.instagram.com/compacsort/> COMPAC SORTING EQUIPMENT LTD | 4 Henderson Pl | Onehunga | Auckland 1061 | New Zealand Switchboard: +64 96 34 00 88 | tomra.com<http://www.tomra.com> The information contained in this communication and any attachment is confidential and may be legally privileged. It should only be read by the person(s) to whom it is addressed. If you have received this communication in error, please notify the sender and delete the communication. From: BUSSIERES Vincent Sent: Wednesday, 20 November 2019 23:05 To: etherlab-users@etherlab.org<mailto:etherlab-users@etherlab.org> Subject: [etherlab-users] EtherCAT master command not found Hello everybody, I try to use Ethercat Master for linux. Building and configuration seem to be OK. I use systemd to run Ethercat master as a service. I configured « Ethercat.conf » by filling « MASTER0_DEVICE » with my MAC address and « DEVICE_MODULES » with « e1000 ». But when I start service I get the following message : root@MTSF:/lib/systemd/system# systemctl status etherlab.service ● etherlab.service - EtherCAT Master Kernel Modules Loaded: loaded (/lib/systemd/system/etherlab.service; enabled; vendor preset: enabled) Active: active (exited) since Wed 2019-11-20 10:26:11 CET; 33min ago Process: 1236 ExecStart=/opt/etherlab/sbin/ethercatctl start (code=exited, status=0/SUCCESS) Main PID: 1236 (code=exited, status=0/SUCCESS) Tasks: 0 (limit: 4915) CGroup: /system.slice/etherlab.service nov. 20 10:26:11 MTSF systemd[1]: Starting EtherCAT Master Kernel Modules... nov. 20 10:26:11 MTSF ethercatctl[1236]: /etc/ethercat.conf: ligne 19: MASTER0_DEVICE : commande introuvable nov. 20 10:26:11 MTSF ethercatctl[1236]: /etc/ethercat.conf: ligne 53: DEVICE_MODULES : commande introuvable nov. 20 10:26:11 MTSF systemd[1]: Started EtherCAT Master Kernel Modules. MASTER0_DEVICE and DEVICE_MODULES commands are not found. Does someone have an idea to solve this issue ? I am working under VM. Thanks
_______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users
