[EMAIL PROTECTED] wrote:
> Any Ideas? I'm using Mandrake 6.1 and an older kernel 2.2.13
So am I. 6.1 and kernel 2.2.13-22mdk.
I set this machine up a nearly year ago, and don't remember exactly
what I did. But it's all shell scripts, so you can debug it pretty
easily.
Here's a good place to start: I changed the first line of
/etc/sysconfig/network-scripts/ifup-aliases from "#!/bin/sh" to
"#!/bin/sh -x" then I did ifdown and ifup. This is what it printed.
root@jogger-egg ~# ifdown eth0
root@jogger-egg ~# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:884629 errors:0 dropped:0 overruns:0 frame:0
TX packets:884629 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
root@jogger-egg ~# ifup eth0
+ device=eth0
+ '[' eth0 = '' ']'
+ current=0
+ :
+ '[' '!' -f /etc/sysconfig/network-scripts/ifcfg-eth0:0 ']'
+ /etc/sysconfig/network-scripts/ifup eth0:0
++ expr 0 + 1
+ current=1
+ :
+ '[' '!' -f /etc/sysconfig/network-scripts/ifcfg-eth0:1 ']'
+ /etc/sysconfig/network-scripts/ifup eth0:1
++ expr 1 + 1
+ current=2
+ :
+ '[' '!' -f /etc/sysconfig/network-scripts/ifcfg-eth0:2 ']'
+ /etc/sysconfig/network-scripts/ifup eth0:2
++ expr 2 + 1
+ current=3
+ :
+ '[' '!' -f /etc/sysconfig/network-scripts/ifcfg-eth0:3 ']'
+ exit 0
root@jogger-egg ~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:48:54:67:2C:4E
inet addr:216.218.195.210 Bcast:216.218.195.223
Mask:255.255.255.240
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:3233219 errors:3 dropped:0 overruns:0 frame:0
TX packets:3114210 errors:0 dropped:0 overruns:1 carrier:0
collisions:283640
eth0:0 Link encap:Ethernet HWaddr 00:48:54:67:2C:4E
inet addr:216.218.195.217 Bcast:216.218.195.223
Mask:255.255.255.240
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
eth0:1 Link encap:Ethernet HWaddr 00:48:54:67:2C:4E
inet addr:216.218.195.218 Bcast:216.218.195.223
Mask:255.255.255.240
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
eth0:2 Link encap:Ethernet HWaddr 00:48:54:67:2C:4E
inet addr:216.218.195.219 Bcast:216.218.195.223
Mask:255.255.255.240
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:884629 errors:0 dropped:0 overruns:0 frame:0
TX packets:884629 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
root@jogger-egg ~#
All those lines with plus signs are because of the "sh -x" flag.
Do you get something similar?
--
K<bob>
[EMAIL PROTECTED], http://www.jogger-egg.com/