Best thing would be to just test them and be sure. But don't test with a 3" piece of the wire from end of battery to the other end, because that is not the same as testing a 3/4" piece. You will need a 3" piece of heavy wire and then just the 3/4" of the "fuse" wire to get a valid test.
But trivial to do the test. Bob -----Original Message----- From: EV <ev-boun...@lists.evdl.org> On Behalf Of ken via EV Sent: Wednesday, January 2, 2019 4:26 PM To: Electric Vehicle Discussion List <ev@lists.evdl.org> Cc: ken <k...@peakfoto.com> Subject: [EVDL] fusewires for 18650 cells Thou my cells are rather close in capity, I'm still thinkng of using fuse wire as in the telsa pack . If i used the phone cable 2 pair cable that runs around houses and used 3/4 inch form cell to bus bar would my 10 amp cells be protected ? _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA) _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)