It's of course much safer to discharge as low as you can, (3v/cell) but as long as you restore the compression to the nominal value on the stack it will be fine.
On Fri, Nov 7, 2025 at 6:39 PM Mr. Sharkey via EV <[email protected]> wrote: > Anyone have a take on releasing the compression holding a 10-module > stack of Gen2 leaf modules that are (at least) partially charged (not > full)? It's time to disassemble the pack in my Electrak and swap out > two under-performing modules. I know these modules swell up when > charged, but once charging is stopped, and they sit for a while, is > it safe to disassemble to the pack as-is, or should I discharge it? > > If discharge, how much? A volts-per-cell (half module) value would be > useful. > > _______________________________________________ > Address messages to [email protected] > No other addresses in TO and CC fields > HELP: http://www.evdl.org/help/ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20251107/331c16de/attachment.htm> _______________________________________________ Address messages to [email protected] No other addresses in TO and CC fields HELP: http://www.evdl.org/help/
