Vaclav,
Which docker folder are you building?
generic-dockerhub
or
generic-dockerhub-dev
You should be building your container image from:
generic-dockerhub
(not generic-dockerhub-dev)
Do you have anything defined in vars.yml for "shared_jackets_folder"?
You shouldn't.
Make sure you pull the most recent commit to the repository:
cd eg-docker
# if you've made changes to the repository, let's make sure everything
is back to default:
git clean -x -f -d
git pull
Check the vars.yml, make sure you have:
ubuntu_version: focal
evergreen_version: 3.11.1
add_evergreen_language_support: no
For troubleshooting, you can edit the Dockerfile such that it doesn't
start Evergreen when the image runs:
vi Dockerfile
Comment out this line:
# ENTRYPOINT cd /egconfigs && ansible-playbook
evergreen_restart_services.yml -vvvv -e "hosts=127.0.0.1" && while true;
do sleep 1; done
uncomment this line
ENTRYPOINT while true; do sleep 1; done
Rebuild your image:
docker build --add-host public.localhost:127.0.1.2 --add-host
public:127.0.1.2 --add-host private.localhost:127.0.1.3 --add-host
private:127.0.1.3 . --no-cache
Then run the resulting image
docker run -it -p 80:80 -p 443:443 -p 210:210 -p 6001:6001 -p 32:22 -p
5433:5432 -h app.evergreen.com <image id>
Login to the container:
docker exec -it `docker ps -q` bash
Since you commented out the ENTRYPOINT line, you'll need to run it by hand:
cd /egconfigs && ansible-playbook evergreen_restart_services.yml -vvvv
-e "hosts=127.0.0.1"
If it has an error, at least the container doesn't die. You can
investigate the folder permissions. And maybe fix whatever the issue is.
Hopefully I've given you some ideas to try.
Good luck!
-Blake-
Conducting Magic
Can consume data in any format
MOBIUS
On 8/13/2023 2:52 PM, Vaclav Jansa wrote:
Hello Blake,
docker image was build from Fridays clone of docker git.
with command
docker build . --add-host public.localhost:127.0.1.2 --add-host
public:127.0.1.2 --add-host private.localhost:127.0.1.3 --add-host
private:127.0.1.3 --no-cache
Configuration file is attached,
Failure is then reported almost at end of startup
docker run -it -p 80:80 -p 443:443 -p 210:210 -p 6001:6001 -p 32:22 -p
5433:5432 -h app.evergreen.com <http://app.evergreen.com> 65d123dbd2ed
in task Run autogen.
Error is also attached.
Many thanks for your check and all hints
Vaclav
On Sun, Aug 13, 2023 at 4:19 AM Blake Henderson
<bl...@mobiusconsortium.org> wrote:
Vaclav,
Which command did you use to produce that error?
-Blake-
MOBIUS
On Fri, Aug 11, 2023, 1:42 PM Vaclav Jansa via Evergreen-general
<evergreen-general@list.evergreen-ils.org> wrote:
Hello Blake and Jane,
thanks for all the magic.
We still try to solve multiple problems with localization. So
image with enabled i18n will be better for us and our testing.
Unfortunately our builded image does not start correctly / it
reports some access issue
fatal: [127.0.0.1]: FAILED! => {
"changed": true,
"cmd": "export PATH=$PATH:/openils/bin &&
/openils/bin/autogen.sh -u",
"delta": "0:00:00.005884",
"end": "2023-08-11 14:29:36.772621",
"invocation": {
"module_args": {
"_raw_params": "export PATH=$PATH:/openils/bin &&
/openils/bin/autogen.sh -u",
"_uses_shell": true,
"argv": null,
"chdir": null,
"creates": null,
"executable": null,
"removes": null,
"stdin": null,
"stdin_add_newline": true,
"strip_empty_ends": true,
"warn": true
}
},
"msg": "non-zero return code",
"rc": 1,
"start": "2023-08-11 14:29:36.766737",
"stderr": "mkdir: cannot create directory
‘/openils/var/web/opac/extras/ac’: Permission denied",
"stderr_lines": [
"mkdir: cannot create directory
‘/openils/var/web/opac/extras/ac’: Permission denied"
],
"stdout": "Unable to write to /openils/var/web/opac/common/js,
please check\nUnable to write to
/openils/var/web/js/dojo/fieldmapper, please check\nUnable to
write to /openils/var/web/opac/extras/slimpac, please check",
"stdout_lines": [
"Unable to write to /openils/var/web/opac/common/js, please
check",
"Unable to write to /openils/var/web/js/dojo/fieldmapper,
please check",
"Unable to write to /openils/var/web/opac/extras/slimpac,
please check"
I will try it one more time from build. But maybe you meet
already this issue.
I use for build kvm virtual machine with Ubuntu LTS 22.04 and
actual docker.io <http://docker.io>. everything is running
under user added in docker group.
Many thanks for all your inputs
Vaclav
(a guy which build docker images for Linda's dinner)
On Fri, Aug 11, 2023 at 4:32 PM Blake Graham-Henderson via
Evergreen-general <evergreen-general@list.evergreen-ils.org>
wrote:
Linda,
The images that we've posted to dockerhub were not built
with i18n turned on. That switch needs to have been set to
"yes" during the build process. Which means, you'll
probably want to build your own docker image instead of
using the pre-made images.
Repo: https://github.com/mcoia/eg-docker
Building your own image is done like this:
1. Clone the git repository that does the work:
git clone https://github.com/mcoia/eg-docker.git
2. Customize the vars.yml to suit your needs
cd eg-docker/generic-dockerhub
vi vars.yml
The main two variables are:
ubuntu_version: focal
evergreen_version: 3.9.1
I'd change evergreen_version to: 3.11.1
You're also interested in this setting:
add_evergreen_language_support: no
If you change that setting to "yes" - it will cause the
build to edit the eg_vhost.conf file during the build.
But* if you already have an eg_vhost.conf file that you
would like to use, then leave that setting "no" and copy
your eg_vhost.conf file directly into the
generic-dockerhub folder.
You'll need to make one more change in order to
incorporate your eg_vhost.conf:
# edit Dockerfile
vi Dockerfile
Add this line:
ADD eg_vhost.conf /egconfigs/eg_vhost.conf
Put that line right above this line:
RUN cd /egconfigs && ansible-playbook
install_evergreen.yml -v -e "hosts=127.0.0.1"
so it should look like this:
.....
ADD vars.yml /egconfigs/vars.yml
ADD install_evergreen.yml /egconfigs/install_evergreen.yml
ADD evergreen_restart_services.yml
/egconfigs/evergreen_restart_services.yml
ADD restart_post_boot.yml /egconfigs/restart_post_boot.yml
ADD eg_vhost.conf /egconfigs/eg_vhost.conf
RUN cd /egconfigs && ansible-playbook
install_evergreen.yml -v -e "hosts=127.0.0.1"
ENTRYPOINT cd /egconfigs && ansible-playbook
evergreen_restart_services.yml -vvvv -e "hosts=127.0.0.1"
&& while true; do sleep 1; done
#ENTRYPOINT while true; do sleep 1; done
Now, you're ready to build your own docker image. Like this:
docker build \
--add-host public.localhost:127.0.1.2 \
--add-host public:127.0.1.2 \
--add-host private.localhost:127.0.1.3 \
--add-host private:127.0.1.3 \
. --no-cache
You do need to be in the generic-dockerhub folder when you
run that command
It will take about 15 minutes to complete. Once completed,
Docker will report the sha hash of the image that you just
built. You can see it with this command:
docker images
Now that you have your own image. You can start an
Evergreen server from it. Like this:
|docker run -it -p 80:80 -p 443:443 -p 210:210 -p
6001:6001 -p 32:22 -p 5433:5432 -h app.evergreen.com
<http://app.evergreen.com> <your_new_image_sha_hash> Watch
it boot up, and make sure it finishes. You will know that
it finishes when you see the "PLAY RECAP" line, and there
should be 0 fails. You can safely disconnect from the
container leaving it running using the magic key
combination: ctrl+pq (NOT ctrl+c, that will kill it) |
Now that I've said all of that, and you're going to supply your own
eg_vhost.conf file, it might be faster to use the pre-built image from
dockerhub, boot it up,
then replace the eg_vhost.conf file located in the container, and
restart apache2.
So that would look like this:
1. Start docker with the community container:
|docker run -it -p 80:80 -p 443:443 -p 210:210 -p
6001:6001 -p 32:22 -p 5433:5432 -h app.evergreen.com
<http://app.evergreen.com> mobiusoffice/evergreen-ils:latest|
2. Wait for it to finish starting (look for that PLAY RECAP line, and confirm
"0 fail"). Press ctrl+pq.
3. SSH into the container
ssh -p 32 user@localhost
the password is "password"
3a. Alternatively, you can attach to the container using "docker
exec"
docker exec -it `docker ps -q` bash
4. Once you're on the shell of the container, you need to make your
edits to:
/etc/apache2/eg_vhost.conf
note: vi is not installed in the container, you might have to
install vi:
apt-get update && apt-get install -y vim
vi /etc/apache2/eg_vhost.conf
(make changes)
Save the file
5. Restart apache
/etc/init.d/apache2 restart
That should do it!
Good luck. Feel free to ask questions!
-Blake-
Conducting Magic
Will consume any data format
MOBIUS
On 8/11/2023 8:17 AM, Jane Sandberg via Evergreen-general
wrote:
That is very mysterious!
These steps worked for me to add the 950 db seed in
French within a docker container:
docker exec -it [container_name] bash
cd /home/opensrf/repos/Evergreen
make -f Open-ILS/src/extras/Makefile.install
ubuntu-focal-translator
su opensrf
cd build/i18n
mkdir locale
make newpot
make LOCALE=fr-CA updatepo
exit # go back to root user
cd /home/opensrf/repos/Evergreen/build/i18n && make
LOCALE=fr-CA install
su evergreen
psql -f Open-ILS/src/sql/Pg/950.data.seed-values-fr-CA.sql
El vie, 11 ago 2023 a la(s) 05:51, Linda Jansová
(linda.jans...@gmail.com) escribió:
Thank you very much, Jane!
We currently use the dev tag (but we may also try
some other non-dev tags as you have suggested :-);
actually, it seems that the language selector in the
OPAC correctly appears after a couple of reloads,
then - for a couple of other reloads - it disappears
only to appear again after some more reloads ;-).
It definitely works in mysterious ways so far; we
would probably also need to add the 950 db seed with
French (and Czech) translations. Any ideas how to do
this correctly?
Linda
On 8/11/23 14:25, Jane Sandberg wrote:
Hi Linda,
What tag of the Evergreen container are you using?
I believe that the instructions under "Restarting
Evergreen services" are only applicable to the
"dev" tag (i.e. if you ran `docker run
[...] mobiusoffice/evergreen-ils:dev`). If you don't
specify a tag, it defaults to the "latest" tag,
which doesn't contain the file-based
restart/recompile methods.
I typically use the non-dev tags, using the
following steps to restart apache. Theoretically,
they should work if you are using the dev tag too,
but I haven't tried them:
1. docker ps # this will show the name of the
running container
2. docker exec -it [container_name] bash # this will
provide a shell within the running container. For
example, if step 1 had mentioned that the running
Evergreen container is named "peaceful_spence", it
would be `docker exec -it peaceful_spence bash`
3. apache2ctl restart # simply restarts apache. When
I need to restart all services, I use
`ansible-playbook
/egconfigs/evergreen_restart_services.yml -e
hosts="127.0.0.1"` instead.
Hope this helps,
-Jane
El vie, 11 ago 2023 a la(s) 04:28, Linda Jansová via
Evergreen-general
(evergreen-general@list.evergreen-ils.org) escribió:
Dear all,
We have just started experimenting with a Docker
container
(https://hub.docker.com/r/mobiusoffice/evergreen-ils),
mainly to see whether it could help us identify
what causes i18n issues reported in a separate
thread (with a subject "Evergreen 3.11.0a not
properly switching into Czech in the staff client").
At this point we are a bit stuck as we would
like to make appropriate i18n changes to the
eg_vhost.conf file and then make them visible
both in the OPAC and in the staff client.
We have uncommented lines related to French
translation (just to see if it works before we
would make a deep dive into Czech) and restarted
Evergreen as described at
https://hub.docker.com/r/mobiusoffice/evergreen-ils
(under the heading "Restarting Evergreen
services") but it doesn’t seem to change
anything in the OPAC.
How exactly should we proceed?
(Maybe a more specific piece of documentation
that would answer our question is available
somewhere; in that case, sharing a URL would be
great :-).)
Thank you in advance!
Linda
_______________________________________________
Evergreen-general mailing list
Evergreen-general@list.evergreen-ils.org
http://list.evergreen-ils.org/cgi-bin/mailman/listinfo/evergreen-general
_______________________________________________
Evergreen-general mailing list
Evergreen-general@list.evergreen-ils.org
http://list.evergreen-ils.org/cgi-bin/mailman/listinfo/evergreen-general
_______________________________________________
Evergreen-general mailing list
Evergreen-general@list.evergreen-ils.org
http://list.evergreen-ils.org/cgi-bin/mailman/listinfo/evergreen-general
_______________________________________________
Evergreen-general mailing list
Evergreen-general@list.evergreen-ils.org
http://list.evergreen-ils.org/cgi-bin/mailman/listinfo/evergreen-general
_______________________________________________
Evergreen-general mailing list
Evergreen-general@list.evergreen-ils.org
http://list.evergreen-ils.org/cgi-bin/mailman/listinfo/evergreen-general