How do I make sure the visor kernel module is loaded? On Sun, 2003-01-26 at 10:12, Stephen Witkop wrote: > I am not an expert but I recently got my Palm m515 working with RedHat > 8. > > *First make sure the visor kernel module is loaded.
> > *If you are going to sync with Evolution then you need to configure > gpilotd. On RedHat I used the gpilotd-control-applet which can be > started through Evo in Tools->Pilot Settings. The applet starts/restarts > gpilotd but does not stop it. > > *I don't know how Mandrake sets up usb but I had to use /dev/usb/ttyUSB1 > to connect to my Palm. I think some PalmOS devices use /ttyUSB0 instead > so you may want to try that. I let gpilotd get the username and ID from > the pda since I had already set it up in Windows. > > *Configure the conduits that you want in Evo through Tools->Pilot > Conduit Settings. > > Remember if you want to use jpilot or pilot-xfer then make sure gpilotd > is NOT running or it won't work. One thing I get is that the first time > I sync after a reboot it will fail while the kernel loads the visor > module and then work fine after that. > > HTH, > Stephen > > On Sat, 2003-01-25 at 20:31, ThinKer wrote: > > One of the last steps in being "windows free" in my daily computing is > > my ability to sync my contacts, to-do and calendar with my PDA. > > I searched Google for "Treo USB to sync with Linux" and I found nothing > > useful. > > > > I am running Mandrake 9 (2.4.19-16mdk kernel) on a 500 Mhz PIII with > > 256MB RAM. I am using KDE 3.0.1 Desktop, Evolution 1.2.1 and would > > ultimately like to sync my Treo 180 USB with Evolution. I have Jpilot > > and KPilot installed but I haven't been able to sync with either of > > these programs. > > > > > > My PDA is a Handspring Treo 180 (GSM phone/PalmOS PDA hybrid). The Treo > > is running Palm OS 3.5. I use the USB connection to connect with my PC. > > According to WebMin, my USB is set to start at boot and is currently > > running. (MandrakeSoft, : usb,v 1.44) but I am not 100 % sure it is > > running. > > > > Any help/guidance/instruction on this would be greatly appreciated. > > A step-by-step set of instructions from begining to end would be a > > wonderful thing. > > > > Thank you, > > > > TP > > > > _______________________________________________ > evolution maillist - [EMAIL PROTECTED] > http://lists.ximian.com/mailman/listinfo/evolution > _______________________________________________ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
