You can specify to only register one of the NIC's IP address in DNS. -----Original Message----- From: Chad Wasinger [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 05, 2003 9:57 AM To: Exchange Discussions Subject: Re: "Requesting Data from Exchange Server" too much
Jose, We had bad issues with a server using 2 different IP addresses. This is a bad idea, it creates 2 DNS entries for the same server which confuses AD. My issues were with a DC specifically but I can see how it is also a bad idea on any server. My suggestion is to disconnect , disable and delete the DNS record for one of the NIC's. Good luck, Chad Wasinger System Administrator ----- Original Message ----- From: "Jose Manzano" <[EMAIL PROTECTED]> To: "Exchange Discussions" <[EMAIL PROTECTED]> Sent: Tuesday, August 05, 2003 7:45 AM Subject: RE: "Requesting Data from Exchange Server" too much > Hum...... > > When I do a route print I see the routing table referencing routes to > this network from both cards... > > So what I'm thinking is ... > > Clients sends request to Exchange Servers first nic with IP X.X.X.1 > > > Server sees request and sends back info from NIC2,different IP > > Client gets back data but with a different IP than he is expecting. > > Client gets confused and sends another request this time popping up > the message on the screen... > > Hum..... > > Is this a way to knock out the 2nd nic from being set as a route > to this network with out disabling it? Like through the routing table ? > > Thank you! > > -----Original Message----- > From: Fyodorov, Andrey [mailto:[EMAIL PROTECTED] > Sent: Monday, August 04, 2003 6:19 PM > To: Exchange Discussions > Subject: RE: "Requesting Data from Exchange Server" too much > > The default route from that server is probably going out the wrong NIC. > > > -----Original Message----- > From: Jose Manzano [mailto:[EMAIL PROTECTED] > Sent: Monday, August 04, 2003 4:43 PM > To: Exchange Discussions > Subject: RE: "Requesting Data from Exchange Server" too much > > Hello Russell, > > > Thanks for replying... here are the answers > > > 1) There is a server that is attached to that message. If you have more > than one Exchange server, are you sure you have the right server (it's > happened to me here)? > > It is referring to the server that has the two nic's in it. What > happened > to you at your location. We do have 2 Exchange servers onsite. > > 2) Is this a remote user or a local user (I'm assuming a local user, but > again, I've been burnt on that also). > > They are local users > > 3) Is this all users or one user? > > All users :( > > 4) I would start with DNS. Make sure everything is resolving properly. > > I did nslookups internally and everything is pointing to the gig > card on > the server. The 10/100 does not seem to be used at all. > > ??? > > > > -----Original Message----- > From: Etts, Russell [mailto:[EMAIL PROTECTED] > Sent: Monday, August 04, 2003 4:31 PM > To: Exchange Discussions > Subject: RE: "Requesting Data from Exchange Server" too much > > Hi Joe > > There are a couple of questions I have: > > 1) There is a server that is attached to that message. If you have more > than one Exchange server, are you sure you have the right server (it's > happened to me here)? > 2) Is this a remote user or a local user (I'm assuming a local user, but > again, I've been burnt on that also). > 3) Is this all users or one user? > 4) I would start with DNS. Make sure everything is resolving properly. > > HTH > > Russell > > > -----Original Message----- > From: Jose Manzano [mailto:[EMAIL PROTECTED] > Sent: Monday, August 04, 2003 4:18 PM > To: Exchange Discussions > > > Hello all, > > Here is my problem > > We have an Exchange 5.5 server that is constantly giving you > the message "Requesting Data from Exchange Server" . This is like every > 3rd or 4th message. I'm starting with the NIC's, the server has dual > NIC's that are active on the network. I'm thinking one is causing some > kind of issues when the server sends the data back, and the client gets > confused? I don't know just going on a hunch. > > I wouldn't think we would need dual NIC's on this server. The NIC's > are not teamed, nor is this server clustered. > > Any advice on troubleshooting this message would be highly > appreciated!!! > > Thank you!! > > > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: > http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=& > lang=english > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: > http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=& > lang > =english > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: > http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=& > lang=english > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > > > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: > http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=& lang > =english > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=& lang=english > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=& lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]