I have, but I must admit not for some time. It seems like the telnet built into Windows 2000 won't allow a connection to any other port then 23. I could download another client, but I haven't needed to for some time. Why do you ask?
Erick > -----Original Message----- > From: Blunt, James H (Jim) [mailto:[EMAIL PROTECTED] > Sent: Monday, September 08, 2003 1:38 PM > To: Exchange Discussions > Subject: RE: Message failure > > > Erick, > > Have you attempted to Telnet anywhere and send mail manually? > > -----Original Message----- > From: Erick Thompson [mailto:[EMAIL PROTECTED] > Sent: Monday, September 08, 2003 1:12 PM > To: Exchange Discussions > Subject: RE: Message failure > > > That was a bad example, as it was a mistake on my part. > However, I am still > getting a lot of the error messages, with addresses I know are good. > > As for the error code, you're right, it does tell me > something, but not a > lot. I know what the various codes mean, but it's not that > useful without > some context. For example, 500 is "Syntax error, command > unrecognized". What > was the command that was unrecognized? > > So, let me further define my question. What I am looking for > is information > on exactly what failed. On another SMTP engine (Lyris) I > admin, I get an > error message that has enough information to give me some > idea of what went > wrong. Something like this is what I'm looking for (some personal info > stripped). > > Here is additional information about this error: > > Email: [EMAIL PROTECTED] > Name: **** > List: japanforum > Cause: Mail is undeliverable after 3 attempts. > > To delete this member, send the following two line message to > [EMAIL PROTECTED] > > login (enter your password here) > delete japanforum [EMAIL PROTECTED] > > --- > > Mail Transaction log: > > --> Sending email to: [EMAIL PROTECTED] > <-- DNS lookup succeeded, found 12 acceptable mail servers > for hotmail.com > --> Attempting to connect to: mx1.hotmail.com (65.54.254.129 25) > <-- [connection refused] > <-- Connection refused to: mx1.hotmail.com (65.54.254.129 25) > --> Attempting to connect to: mx1.hotmail.com (65.54.252.99 25) > <-- Connected to: mx1.hotmail.com (65.54.252.99 25) > <-- 220 mc5-f19 Microsoft ESMTP MAIL Service, Version: > 5.0.2195.5600 ready > at Sun, 7 Sep 2003 02:10:35 -0700 > --> HELO 192.168.2.99 > <-- 250 mc5-f19 Hello [204.201.190.99] > --> MAIL FROM:<[EMAIL PROTECTED]> > <-- 250 [EMAIL PROTECTED] OK > --> RCPT TO:<[EMAIL PROTECTED]> > <-- 550 Requested action not taken: mailbox unavailable > --> QUIT > > With this, I can see exactly what went wrong, and if it's > something that I > should take a look at or not. So, where can I get this type > of information > for a failed message in Exchange? I've check the log file > specified in the > default SMTP virtual server, but only appears to contain > source/dest IP > addresses. > > Thanks, > Erick > > > > -----Original Message----- > > From: Blunt, James H (Jim) [mailto:[EMAIL PROTECTED] > > Sent: Monday, September 08, 2003 12:33 PM > > To: Exchange Discussions > > Subject: RE: Message failure > > > > > > Erick, > > > > The message is actually very informative. Three things: > > 1. Did you actually look at where you were trying to send it? > > [EMAIL PROTECTED] Shouldn't that be @nbr.ORG? > > 2. The system is telling you it couldn't deliver the > > message and is > > giving you a code to look up. > > 3. Did you Google the following terms "email delivery codes"? > > > > Here is a link you may want to bookmark: > > > > http://www.mailsbroadcast.com/email.bolts&nuts/smtp.codes.comm > > and.group.htm > > (may wrap) > > > > You really need to start doing your own research and being a > > little more > > descriptive in not only your problem, but the layout of your > > system and what > > you have done to try and fix the problem to this point. > > > > -----Original Message----- > > From: Erick Thompson [mailto:[EMAIL PROTECTED] > > Sent: Monday, September 08, 2003 12:01 PM > > To: Exchange Discussions > > Subject: Message failure > > > > > > Hello, > > > > I'm fairly new at working with Exchange. I'm having a problem > > with sending > > mail from my account. With almost every message (but not > > every one), I get > > an error. The problem is, the message that Exchange sends > > back to me is all > > but useless, I can't find any other references to the error. > > How can I dig > > into this and find out what happened? I've check the event > log with no > > success. > > > > Thanks, > > Erick > > > > > > Your message did not reach some or all of the intended recipients. > > > > Subject: FW: Budget > > Sent: 9/8/2003 11:59 AM > > > > The following recipient(s) could not be reached: > > > > [EMAIL PROTECTED] on 9/8/2003 11:59 AM > > The e-mail system was unable to deliver the > > message, but did not > > report a specific reason. Check the address and try again. > > If it still > > fails, contact your system administrator. > > <dc.nbr.lan #5.0.0> > > > > _________________________________________________________________ > > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > > Web Interface: > > http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&t > ext_mode=&lang > =english > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: > http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&t ext_mode=& lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=& lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=& lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]