Time zone on both machines is PST - Tijuana (I want a XX amber) and the time
is the same. Both NICs are set to 100 MB full Duplex.  

I will check on the switch.



-----Original Message-----
From: Campbell, Rob [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 05, 2002 11:23 AM
To: MS-Exchange Admin Issues
Subject: RE: 5 hour delay btw receive and delivery


If the timezone settings are correct, you might start looking for
communiction problems between the servers.  If it's a managed switch check
the switch stats for errors on those 2 ports.  If you see anything in the
"Late Collisions" counters start looking for a duplex mismatch.

> -----Original Message-----
> From: Bob Falkenberg [mailto:[EMAIL PROTECTED]]
> Sent: Friday, April 05, 2002 1:03 PM
> To: MS-Exchange Admin Issues
> Subject: RE: 5 hour delay btw receive and delivery
> 
> 
> On a 100 MB switched network. They are sitting next to each 
> other in my
> server room and are on the same switch.
> 
> Bob F. 
> 
> -----Original Message-----
> From: Campbell, Rob [mailto:[EMAIL PROTECTED]]
> Sent: Friday, April 05, 2002 10:59 AM
> To: MS-Exchange Admin Issues
> Subject: RE: 5 hour delay btw receive and delivery
> 
> 
> What kind of connector between the 2 servers?
> 
> -----Original Message-----
> From: Bob Falkenberg [mailto:[EMAIL PROTECTED]]
> Sent: Friday, April 05, 2002 12:38 PM
> To: MS-Exchange Admin Issues
> Subject: 5 hour delay btw receive and delivery
> 
> 
> Hello folks, 
>  
> Inbound STMP message received on Server1 at 12:17 AM per the message
> tracking log. SMTP Inbound message is Transferred from the 
> Internet Mail
> Service at 12:17 on Server1.  Server1 expands Distribution 
> list and other
> recipients.
>  
> 2 messages are received from Server1 in the Server 2 MTA at 
> 5:46 AM.  There
> was a 5 hour gap between the time received and delivered.  
>  
> This is an Exchange 5.5 sp4 installation running on NT 4.0 
> sp6.  Server 1 is
> OWA/IMC sever with 1gb of ram, dual 733 processors.  Server 2 
> is dual 733
> processors with 500 mb of ram an is the mailbox/public folder server.
> Server 2 is running Scan Mail 3.51 and Server 1 doesn't run Scan Mail.
>  
> Open to suggestions on where to start trouble shooting this one.
>  
>  
> Bob Falkenberg
> List Charter and FAQ at:
> http://www.sunbelt-software.com/exchange_list_charter.htm
> 
> 
> 
> List Charter and FAQ at:
> http://www.sunbelt-software.com/exchange_list_charter.htm
> 
> List Charter and FAQ at:
> http://www.sunbelt-software.com/exchange_list_charter.htm
> 

List Charter and FAQ at:
http://www.sunbelt-software.com/exchange_list_charter.htm

List Charter and FAQ at:
http://www.sunbelt-software.com/exchange_list_charter.htm

Reply via email to