17 gigs and your stm should only take about 20 minutes or so.  I only use the 
command line, sorry I should have said that first.  xcopy seems to work the 
best for me.  Windows has been known to bugger up a copy. Answering on the fly, 
sorry.  When you create the partition and format make sure that you set it to 
not be able to compress folders and files.  This is bad Juju for exchange.  On 
large files Windows has a bad habit of compressing files weather you want it to 
or not.  You will need to go in to the advanced properties of the file after 
copy to make sure this hasn't happened, just make sure all boxes are unchecked. 
 Best is to totaly blow the drive away and start from scratch and set up the 
drive correctly.  That may be what's buggering you eseutil.  Sorry, answering 
on the fly.
  ----- Original Message ----- 
  From: [EMAIL PROTECTED] 
  To: MS-Exchange Admin Issues 
  Sent: Thursday, November 13, 2008 1:53 PM
  Subject: RE: defrag error


  Thanks Matt ;)

   

  From: Matt Moore [mailto:[EMAIL PROTECTED] 
  Sent: Thursday, November 13, 2008 3:46 PM
  To: MS-Exchange Admin Issues
  Subject: Re: defrag error

   

  Naw just a little girlscout kiss.......  =)

    ----- Original Message ----- 

    From: Tim Vander Kooi 

    To: MS-Exchange Admin Issues 

    Sent: Thursday, November 13, 2008 1:44 PM

    Subject: RE: defrag error

     

    That's an awfully personal question. I hope you at least bought him dinner. 
:-P

    TVK

     

    From: Matt Moore [mailto:[EMAIL PROTECTED] 
    Sent: Thursday, November 13, 2008 3:41 PM
    To: MS-Exchange Admin Issues
    Subject: Re: defrag error

     

    How big is the store?

      ----- Original Message ----- 

      From: [EMAIL PROTECTED] 

      To: MS-Exchange Admin Issues 

      Sent: Thursday, November 13, 2008 1:27 PM

      Subject: RE: defrag error

       

      Ok, so I'm copying to the folder out to the external drive.this sucks!@ 
but I'm going to sit back and wait and see what occurs. Thanks for everyone's 
assistance.

       

       

      Thomas

       

      From: Matt Moore [mailto:[EMAIL PROTECTED] 
      Sent: Thursday, November 13, 2008 3:08 PM
      To: MS-Exchange Admin Issues
      Subject: Re: defrag error

       

      I've had to do that although PSS will tell you it doesn't work.  I might 
add to that make sure and reformat the drive with the machine it's plugged into 
before doing anything.  Expect it to be very slow, You may even think it's 
failed it's so slow, even Esata sucks.

      I've found it better to just have a big sata drive and controller card 
for temp space.  And backup, backup ,backup!

      M

        ----- Original Message ----- 

        From: Jake Gardner 

        To: MS-Exchange Admin Issues 

        Sent: Thursday, November 13, 2008 12:51 PM

        Subject: RE: defrag error

         

        I'm not 100% on this but what about copying the /mbdata folder to the 
ext drive, run eseutil on it there.   Just make sure you're all backed up!

         

         

         

        Thanks,

         

        Jake Gardner

        TTC Network Administrator

        Ext. 246

         

         


------------------------------------------------------------------------

        From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
        Sent: Thursday, November 13, 2008 3:42 PM
        To: MS-Exchange Admin Issues
        Subject: RE: defrag error

        Anyone have an idea? I just placed a external drive that is 150 gigs 
and same error occurred.

         

        I'm stumped...HELP..SOS

         

         

        Thanks,

         

        Thomas

         

         

        From: Thomas Gonzalez 
        Sent: Thursday, November 13, 2008 9:12 AM
        To: MS-Exchange Admin Issues
        Subject: defrag error

         

        So my journal / archive server is ran out of space.ok no problem. 
Dismount store, shutdown all services, open a command window type in the 
command and tell it to create the temp on a drive that has plenty of space:

         



         

        I run the command.and I receive this error below:

         

        Any ideas?

         

         

        TIA.

         

        Thomas

         

         

        D:\Program Files\Exchsrvr\bin>eseutil /d "D:\program 
files\exchsrvr\mdbdata\priv

        1.edb" /tf:\tempdfrg.edb

         

        Microsoft(R) Exchange Server Database Utilities

        Version 6.5

        Copyright (C) Microsoft Corporation. All Rights Reserved.

         

        Initiating DEFRAGMENTATION mode...

                    Database: D:\program files\exchsrvr\mdbdata\priv1.edb

              Streaming File: D:\program files\exchsrvr\mdbdata\priv1.STM

              Temp. Database: f:\tempdfrg.edb

        Temp. Streaming File: f:\tempdfrg.STM

         

         

         

         

        Operation terminated with error -1808 (JET_errDiskFull, No space left 
on disk) a

        fter 4.166 seconds.

         

         

         

         

        This email and any attached files are confidential and intended solely 
for the intended recipient(s). If you are not the named recipient you should 
not read, distribute, copy or alter this email. Any views or opinions expressed 
in this email are those of the author and do not represent those of the Girl 
Scouts of Southwest Texas. Warning: Although precautions have been taken to 
make sure no viruses are present in this email, Girl Scouts of Southwest Texas 
cannot accept responsibility for any loss or damage that arise from the use of 
this email or attachments.

         

         

        This email and any attached files are confidential and intended solely 
for the intended recipient(s). If you are not the named recipient you should 
not read, distribute, copy or alter this email. Any views or opinions expressed 
in this email are those of the author and do not represent those of the Girl 
Scouts of Southwest Texas. Warning: Although precautions have been taken to 
make sure no viruses are present in this email, Girl Scouts of Southwest Texas 
cannot accept responsibility for any loss or damage that arise from the use of 
this email or attachments.

         

         

         

         

        ***Teletronics Technology Corporation*** 
        This e-mail is confidential and may also be privileged.  If you are not 
the addressee or authorized by the addressee to receive this e-mail, you may 
not disclose, copy, distribute, or use this e-mail. If you have received this 
e-mail in error, please notify the sender immediately by reply e-mail or by 
telephone at 267-352-2020 and destroy this message and any copies.  

        Thank you.

        *******************************************************************

       

       

      This email and any attached files are confidential and intended solely 
for the intended recipient(s). If you are not the named recipient you should 
not read, distribute, copy or alter this email. Any views or opinions expressed 
in this email are those of the author and do not represent those of the Girl 
Scouts of Southwest Texas. Warning: Although precautions have been taken to 
make sure no viruses are present in this email, Girl Scouts of Southwest Texas 
cannot accept responsibility for any loss or damage that arise from the use of 
this email or attachments.

       

       

     

     

     

     

   

   

  This email and any attached files are confidential and intended solely for 
the intended recipient(s). If you are not the named recipient you should not 
read, distribute, copy or alter this email. Any views or opinions expressed in 
this email are those of the author and do not represent those of the Girl 
Scouts of Southwest Texas. Warning: Although precautions have been taken to 
make sure no viruses are present in this email, Girl Scouts of Southwest Texas 
cannot accept responsibility for any loss or damage that arise from the use of 
this email or attachments.





~ Ninja Email Security with Cloudmark Spam Engine Gets Image Spam ~
~             http://www.sunbeltsoftware.com/Ninja                ~

<<image001.png>>

Reply via email to