Thanks You are spot on!
I contacted PSS again and they provided me a link to get the 2007 files. I was told that the 2007 files are backward compatible with 2003 so I just needed to make sure that the files I am using are in sync with the DPM server and greater than than those being used on the SBS server. On Wed, Sep 2, 2009 at 2:00 PM, Barsodi.John <john.bars...@igt.com> wrote: > Since you are running DPM on Svr 2008, you must use the Exchange 2007 > management tools. > > > > Have you tried using the x64 Exchange 2007 SP1 versions of eseutil.exe and > ese.dll? > > > > Thanks, > > - JB > > > > *From:* Dave Vantine [mailto:dvant...@gmail.com] > *Sent:* Wednesday, September 02, 2009 10:49 AM > *To:* MS-Exchange Admin Issues > *Subject:* DMP Server SBS woes > > > > I have been working with PSS on an issue where I was not able to install > the DPM agent onto my SBS server. As per their recommendations/best > practices I installed a 64 Bit version of DPM onto a 64bit W2k8 server. > > > > When I try to configure the protection group to backup exchange it throws > and error indicating that to run the Esutil consistency check on the DMP > server I need to have 64bit verisons of Ese.dll and Eseutil.exe. My SBS > 2003 server is 32 bit and their are obviously no 64bit versions of these to > files. I would also assume that with all the patches/service pack that the > versions are newer than what would be found on a 64bit base configuration. > > > > I am getting somewhat of the runaround regarding how to get the correct > files so I can run the Esutil consitancy check. Any one else using DPM > server to backup exchange and had to deal with this or how I might get the > correct 64bit files to install on the DPM Server > > > > Thanks in advance > > -Dave Vantine > > > -- Thanks Dave Vantine