A user submits a message from Outlook or OWA to a HT via a receive connector on the HT.
Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com From: Eric [mailto:seag...@gmail.com] Sent: Wednesday, June 30, 2010 4:49 PM To: MS-Exchange Admin Issues Subject: Re: Message Size Limits Fail I restarted the Microsoft Exchange Transport Service and the receive connector size limits are fine for us, unless they need to be changed as well for the outgoing limits to work as well. Thanks for the suggestions! On Wed, Jun 30, 2010 at 1:44 PM, Michael B. Smith <mich...@smithcons.com<mailto:mich...@smithcons.com>> wrote: You forget the receive connector size limit. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com From: Eric [mailto:seag...@gmail.com<mailto:seag...@gmail.com>] Sent: Wednesday, June 30, 2010 4:38 PM To: MS-Exchange Admin Issues Subject: Message Size Limits Fail We have used the default 10MB size limits until now. I tried increasing the send size limit to 20MB and the messages still fail. I've done the following: Set-TransportConfig -MaxSendSize 20mb Get-SendConnector | Set-SendConnector -MaxMessageSize 20mb Set-Mailbox "Username" -MaxSendSize 20mb Verified all the settings were applied. Tried sending an email with a 12mb attachment and get the following error: #550 5.2.3 RESOLVER.RST.RecipSizeLimit; message too large for this recipient ## Any other suggestions why this isn't working? Thanks! Eric