Ok set the 20mb limit for all my receive connectors and it still won't allow the 12mb test attachment to be sent. Any other ideas? I shouldn't have to reboot the server should I?
Thanks, Eric On Wed, Jun 30, 2010 at 1:51 PM, Michael B. Smith <[email protected]>wrote: > A user submits a message from Outlook or OWA to a HT via a receive > connector on the HT. > > > > Regards, > > > > Michael B. Smith > > Consultant and Exchange MVP > > http://TheEssentialExchange.com > > > > *From:* Eric [mailto:[email protected]] > *Sent:* Wednesday, June 30, 2010 4:49 PM > > *To:* MS-Exchange Admin Issues > *Subject:* Re: Message Size Limits Fail > > > > I restarted the Microsoft Exchange Transport Service and the receive > connector size limits are fine for us, unless they need to be changed as > well for the outgoing limits to work as well. > > Thanks for the suggestions! > > On Wed, Jun 30, 2010 at 1:44 PM, Michael B. Smith <[email protected]> > wrote: > > You forget the receive connector size limit. > > > > Regards, > > > > Michael B. Smith > > Consultant and Exchange MVP > > http://TheEssentialExchange.com > > > > *From:* Eric [mailto:[email protected]] > *Sent:* Wednesday, June 30, 2010 4:38 PM > *To:* MS-Exchange Admin Issues > *Subject:* Message Size Limits Fail > > > > We have used the default 10MB size limits until now. I tried increasing > the send size limit to 20MB and the messages still fail. I've done the > following: > > Set-TransportConfig -MaxSendSize 20mb > Get-SendConnector | Set-SendConnector -MaxMessageSize 20mb > Set-Mailbox "Username" -MaxSendSize 20mb > > Verified all the settings were applied. Tried sending an email with a 12mb > attachment and get the following error: > > #550 5.2.3 RESOLVER.RST.RecipSizeLimit; message too large for this > recipient ## > > > > Any other suggestions why this isn't working? > > > Thanks! > > Eric > > > > >
