Hi DJ,
the only information that I can find about eql is that it is (i believe)
included in the 2.2.xx source, however the eql_enslave program is unusable
for the 2.2.xx kernel. I've been doing some extensive searching for it, but
am unable to find a working version, nor was i able to fiddle with the
eql_enslave.c file to get it working (i'm a _very_ basic hack with c). If
you have any information or ideas as to how we can get this going, would you
be able to post back? I'm stumped for ideas at this point in time. =[
Zak
----- Original Message -----
From: DJ <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, August 29, 1999 11:42 PM
Subject: Re: [expert] Multilink / EQL ?
> I am in the process(waiting on card shipment) of setting up 6 or 8
> modems from a remote site on our wan to do almost the same thing. Let me
> know if you find any info....
>
> thanks DJ
>
>
>
>
> Zak McKracken wrote:
> >
> > Hey all,
> >
> > I've just spent about 3 hours looking for something that will allow
me
> > to use two dialup accounts (either with the same ISP, or a different
one - i
> > can do both), that will allow for the use of both modems to share data
to a
> > network. basically the EQL stuff that i had a look at looked good, but
I
> > was unable to track down anything that would compile/run on either of my
> > mandrake boxes, and multilinking involves going back to kernel 2.2.2
> >
> > If anyones managed to do this - would you be able to fill me (and
anyone
> > else) on how you did it?
> >
> > Thanks,
> >
> > Zak
>
