I've experienced quite the same. Mine is 3c509b, and eth0 is failed
to startup. The problem is solved when I add "alias eth0 3c509.o"
in /etc/conf.module.
Hope this help. Maybe, we should wait for Mdk7.1 or Redhat ;-((
-isa-
On Mon, 24 Jan 2000 19:26:13 -0600, you wrote:
| Ok. I have tried sending this to cooker list several times and it never
| shows up over there.
|
|
| Here is my computer
| Dual Celeron 466, 256 meg ram.
| BP6 motherboard, I am not using the HPT66 connectors on the
| motherboard, ( waiting till drivers are stable.)
| This machine was running Mandrake 6.1 till first of last week when I
| wiped it clean to install Mandrake 7.
|
| Here is my problem
| I am doing an expert install and choosing medium security setting in the
| install process. The install all seems to be fine. It detects my network
| card, ( one note here, It does not detect the correct network setting
| like mandrake 5.3 - 6.1 did, the gateway and dns servers are incorrect)
| I put in the correct ip numbers for the network setting and continue, I
| even tried the crypto download one time to make sure the network is
| working at that point and it is. Then once past the install process the
| network is inaccessible. I can not ping that machine from another on the
| network nor can I ping out from it.
|
| I have done this 4 times now because I was sure that it was something
| that I was doing wrong.
| So then I did a Mandrake 6.1 install again to make sure that the
| computer was working ok. That worked just fine.
|
| What should I try next?
|
