Ken....whoops! Sorry about that. initrd.img is only
necessary when you boot off of a scsi hard drive. Forget the
initrd= line in lilo.conf if you don't have any scsi drives.
:-)
Alan
Ken Archer wrote:
>
> I don't have the "initrd=/boot/initrd.img" line in lilo.conf that was written
> on the original install. I also can't find a initrd.img file with locate.
>
> On Sun, 07 May 2000, you wrote:
>
> > Also there are a series of lines indicating where files
> > necessary to the boot process may be founnd in the mounted
> > filesystem.
> >
> > map=/boot/map
> > install=/boot/boot.b
> > keytable=/boot/us.klt
> > image=/boot/vmlinuz
> > initrd=/boot/initrd.img
> >
> > So on your system, lilo must already be installed on the mbr
> > or you wouldn't be getting the LI. But the LI indicates that
> > it can't find a file necessary to the booting process, so the
> > root= line needs to be correct as do the map=, install=,
> > keytable=, image=, and initrd= lines.
> >
> > As root you need to edit the /etc/lilo.conf file and when
> > you've got all these lines corrected then issue this command
> > at a command line as root:
> --
> Kenneth Archer + San Antonio, Texas
> [EMAIL PROTECTED] ICQ #24980801
> Powered by Linux ++ Mailed by Kmail
