On Wed, 15 Nov 2000, Muzza wrote: Seems to me like its a problem with the medium, not up to orangebook specs maybe? an illegal pregap or something. Just a guess, i'm not a cdrecord pro but I prefer to use cdrecord in console because it works quite well, does just what ya tell it. > -------------- > Just for those who've said that using cdreord from the command line will > magically make it work.... > > [root@xxxxxxxxxxx# /usr/bin/cdrecord -v -eject -pad speed=4 dev=0,0,0 -dao > -audio -swab /extra/track1.wav/ extra/track2.wav > Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling > TOC Type: 0 = CD-DA > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > Linux sg driver version: 2.1.39 > Using libscg version 'schily-0.1' > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 1 > Vendor_info : 'LG ' > Identifikation : 'CD-RW CED-8080B ' > Revision : '1.05' > Device seems to be: Generic mmc CD-RW. > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : SWABAUDIO > FIFO size : 4194304 = 4096 KB > Track 01: audio 49 MB (04:56.98) no preemp > Track 02: audio 47 MB (04:41.97) no preemp > Total size: 97 MB (09:38.96) = 43422 sectors > Lout start: 97 MB (09:40/72) = 43422 sectors > Current Secsize: 2048 > ATIP info from disk: > Indicated writing power: 5 > Reference speed: 2 > Is not unrestricted > Is erasable > ATIP start of lead in: -11625 (97:27/00) > ATIP start of lead out: 335100 (74:30/00) > speed low: 0 speed high: 4 > power mult factor: 5 6 > recommended erase/write power: 3 > Disk type: Phase change > Manuf. index: 0 > Manufacturer: Illegal Manufacturer code > Blocks total: 335100 Blocks current: 335100 Blocks remaining: 291678 > RBlocks total: 353448 RBlocks current: 353448 RBlocks remaining: 310026 > Starting to write CD/DVD at speed 2 in write mode for single session. > Last chance to quit, starting real write in 1 seconds. > Waiting for reader process to fill input buffer ... input buffer ready. > Performing OPC... > Sending CUE sheet... > /usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 > Writing pregap for track 1 at -150 > Starting new track at sector: 0 > Track 01: 3 of 49 MB written (fifo 93%)./usr/bin/cdrecord: Input/output > error. write_g1: scsi sendcmd: retryable error > CDB: 2A 00 00 00 06 54 00 00 1B 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 > Sense Key: 0x3 Medium Error, Segment 0 > Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 > Sense flags: Blk 0 (not valid) > > write track data: error after 3810240 bytes > Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 > Writing time: 103.380s > Fixating... > Fixating time: 0.001s > /usr/bin/cdrecord: fifo had 124 puts and 61 gets. > /usr/bin/cdrecord: fifo was 0 times empty and 28 times full, min fill was > 92%. > >
Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.