Excuse me for re-sending this mail. It's very important for me. Thanks. Salu2, Oscar. ---------- Mensaje Reenviado ---------- Subject: Problems with ACER 620U scanner Date: Mon, 25 Jun 2001 20:40:13 +0200 From: Oscar <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Hi. I have a problem with the USB scanner AcerScan 620U. I've read and followed the steps in http://sourceforge.net/projects/snapscan. When I connect the USB scanner, it is detected but is not calimed by any active driver: :-| -------------------- Jun 25 20:08:32 caret kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 Jun 25 20:08:32 caret kernel: usb.c: USB device 2 (vend/prod 0x4a5/0x2060) is not claimed by any active driver. Jun 25 20:08:48 caret kernel: usb.c: USB disconnect on device 2 Jun 25 20:08:53 caret kernel: hub.c: USB new device connect on bus1/1, assigned device number 3 Jun 25 20:08:53 caret kernel: usb.c: USB device 3 (vend/prod 0x4a5/0x2060) is not claimed by any active driver. -------------------- :-) Then I do: insmod scanner, and it seems to work: -------------------- Jun 25 20:10:09 caret kernel: usb.c: registered new driver usbscanner Jun 25 20:10:09 caret kernel: scanner.c: USB Scanner support registered. Jun 25 20:10:17 caret kernel: usb.c: USB disconnect on device 3 Jun 25 20:10:23 caret kernel: hub.c: USB new device connect on bus1/1, assigned device number 4 -------------------- Now, following the steps, I upload the firmware: ./acerfirm /dev/usb/scanner0 u96v057.bin Then the scanner starts flashing it's LED (it works, it works!) :-D Now, I would like to scan a photo. Ups! (mi gozo en un pozo): :-< -------------------- Jun 25 20:14:48 caret kernel: usb_control/bulk_msg: timeout Jun 25 20:14:48 caret kernel: scanner.c: write_scanner: NAK received. jun 25 20:14:48 caret su(pam_unix)[22882]: session closed for user root Jun 25 20:14:48 caret modprobe: modprobe: Can't locate module char-major-81 Jun 25 20:14:49 caret last message repeated 4 times Jun 25 20:15:49 caret kernel: usb_control/bulk_msg: timeout Jun 25 20:15:49 caret kernel: scanner.c: write_scanner: NAK received. Jun 25 20:16:49 caret kernel: usb_control/bulk_msg: timeout Jun 25 20:16:49 caret kernel: scanner.c: write_scanner: NAK received. Jun 25 20:17:49 caret kernel: usb_control/bulk_msg: timeout Jun 25 20:17:49 caret kernel: scanner.c: write_scanner: NAK received. Jun 25 20:18:49 caret kernel: usb_control/bulk_msg: timeout Jun 25 20:18:49 caret kernel: scanner.c: write_scanner: NAK received. Jun 25 20:19:49 caret kernel: usb_control/bulk_msg: timeout Jun 25 20:19:49 caret kernel: scanner.c: write_scanner: NAK received. Jun 25 20:20:49 caret kernel: usb_control/bulk_msg: timeout Jun 25 20:20:49 caret kernel: scanner.c: write_scanner: NAK received. ----------------- Now xscanimage is died. The RXVT is died, too. :-( Can anybody help? Thank you! Salu2, Oscar. -------------------------------------------------------
