On Saturday 04 August 2001 01:56, Felix Miata wrote:
> George Petri wrote:
> > I am using Mandrake 7.2 After I compiled a 2.4.4 kernel (not from
> > Mandrake, but the "official" one), I get this message, at the console
> > (CTRL+ALT+F1) a short while after X has loaded:
> >
> > PCI: Found IRQ 9 for device 00:0c.0
> > PCI: The same IRQ used for device 00:0e.0
> >
> > lspci shows:
> >
> > 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
> > (rev 03) 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP
> > bridge (rev 03) 00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA
> > (rev 02) 00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev
> > 01) 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
> > 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
> > 00:0c.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev
> > 04) 00:0d.0 Communication controller: Lucent Microelectronics WinModem
> > 56k (rev 01) 00:0e.0 Ethernet controller: Macronix, Inc. [MXIC] MX987x5
> > (rev 25) 01:00.0 VGA compatible controller: NVidia / SGS Thomson (Joint
> > Venture) Riva128 (rev 22)
> >
> > I am using a Pentium II-based motherboard. Is this IRQ conflict bad
> > because both my sound card and Ethernet card (kernel module: tulip) work
> > alright? Actually, come to think of it, my 100 MBit Ethernet Card (a
> > cheap US$15 Skymaster) in both Windows and Linux has only been achieving
> > 200KB/s. Could it be due to this IRQ conflict?
> >
> > How do I fix this?
>
> What is PNP OS setting in your BIOS? PNP OS really means M$ Windoze* OS.
> All other OS'es can choke if set to YES. Windoze only needs it to be YES
> when new hardware is first installed. In all other circumstances it
> should be NO.
My PNP OS setting is "On". I have tried all combinations of the PNP OS and
Share IRQ settings but all that does is (sometimes) change the IRQ of my Ethernet card
to 9 (and also my sound card!!!) so there is still a conflict.
Any ideas?
Thanks again,
George
