Hi, I agree with Mikko. I think it is a hardware difference. I have tried restarting sound, rebooting and all the configuration I have found on mailing lists... no luck!
I am posting the lspci -vvn and lspci -v output below and will try and contact Dell and Creative. Should I let someone at Mandrake know. Should I post something to harddrake? Don't really know what I can do in case this is a new hardware version. Thanks Andre ------------ [root@hulk drepster]# lspci -vvn 00:00.0 Class 0600: 8086:2530 (rev 04) Subsystem: 1028:010c Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> 00:01.0 Class 0604: 8086:2532 (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: fc000000-fdffffff Prefetchable memory behind bridge: f0000000-f7ffffff BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- 00:1e.0 Class 0604: 8086:244e (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe100000-fe2fffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 Class 0601: 8086:2440 (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 Class 0101: 8086:244b (rev 04) (prog-if 80 [Master]) Subsystem: 1028:010c Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 4: I/O ports at ffa0 [size=16] 00:1f.2 Class 0c03: 8086:2442 (rev 04) Subsystem: 1028:010c Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at ff80 [size=32] 00:1f.3 Class 0c05: 8086:2443 (rev 04) Subsystem: 1028:010c Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at dcd0 [size=16] 00:1f.4 Class 0c03: 8086:2444 (rev 04) Subsystem: 1028:010c Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ff60 [size=32] 01:00.0 Class 0300: 10de:0172 (rev a3) Subsystem: 10de:015a Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 16 Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at f4000000 (32-bit, prefetchable) [size=64M] Region 2: Memory at f3f80000 (32-bit, prefetchable) [size=512K] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2,x4 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> 02:07.0 Class 0200: 10ec:8139 (rev 10) Subsystem: 13e0:0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at ec00 [size=256] Region 1: Memory at fe1ffc00 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:09.0 Class 0401: 1102:0006 Subsystem: 1102:1003 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at e8e0 [size=32] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:09.1 Class 0980: 1102:7004 Subsystem: 1102:1003 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 0: I/O ports at e8d8 [size=8] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- ------------------------------------------------------------------- [root@hulk drepster]# lspci -v 00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 04) Subsystem: Dell Computer Corporation: Unknown device 010c Flags: bus master, fast devsel, latency 0 Memory at e8000000 (32-bit, prefetchable) [size=128M] Capabilities: [a0] AGP version 2.0 00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: fc000000-fdffffff Prefetchable memory behind bridge: f0000000-f7ffffff 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe100000-fe2fffff 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04) Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04) (prog-if 80 [Master]) Subsystem: Dell Computer Corporation: Unknown device 010c Flags: bus master, medium devsel, latency 0 I/O ports at ffa0 [size=16] 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 04) (prog-if 00 [UHCI]) Subsystem: Dell Computer Corporation: Unknown device 010c Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at ff80 [size=32] 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04) Subsystem: Dell Computer Corporation: Unknown device 010c Flags: medium devsel, IRQ 17 I/O ports at dcd0 [size=16] 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 04) (prog-if 00 [UHCI]) Subsystem: Dell Computer Corporation: Unknown device 010c Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at ff60 [size=32] 01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX420] (rev a3) (prog-if 00 [VGA]) Subsystem: nVidia Corporation: Unknown device 015a Flags: 66Mhz, medium devsel, IRQ 16 Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Memory at f4000000 (32-bit, prefetchable) [size=64M] Memory at f3f80000 (32-bit, prefetchable) [size=512K] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [44] AGP version 2.0 02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10) Subsystem: GVC Corporation: Unknown device 0001 Flags: bus master, medium devsel, latency 64, IRQ 16 I/O ports at ec00 [size=256] Memory at fe1ffc00 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 02:09.0 Multimedia audio controller: Creative Labs: Unknown device 0006 Subsystem: Creative Labs: Unknown device 1003 Flags: bus master, medium devsel, latency 64, IRQ 18 I/O ports at e8e0 [size=32] Capabilities: [dc] Power Management version 2 02:09.1 Input device controller: Creative Labs: Unknown device 7004 Subsystem: Creative Labs: Unknown device 1003 Flags: bus master, medium devsel, latency 64 I/O ports at e8d8 [size=8] Capabilities: [dc] Power Management version 2 On Monday 04 Nov 2002 21:58, Mikko Lipasti wrote: > Hi, > > My hunch is that Andre and Alice have different hardware versions of the > Live! card. Could you guys post a 'lspci -vvn' just to make sure? Andre, > have you tried to contact Creative (or Dell) about this? > > Back in 1999 (or so) I had problems with an internal ISDN card. It > turned out that the manufacturer had two different cards shipping at the > same time under the same brand and model name. The only difference was a > stance on the board. Had a nice time trying to figure that one out.
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com