All,
OK this card will work if I install RH.... I don't do Blue (is this
the past tense of blows?) so I'd really like to make it work in MDK.
I'm getting an error when I insert the card that makes no sense... here
is the output from /var/log/messages
<output>
Jan 22 20:05:07 jamlap kernel: cs: cb_alloc(bus 3): vendor 0x1317,
device 0x8201Jan 22 20:05:07 jamlap kernel: PCI: Enabling device 03:00.0
(0000 -> 0003)
Jan 22 20:05:07 jamlap cardmgr[13049]: socket 1: CardBus hotplug device
Jan 22 20:05:07 jamlap /etc/hotplug/pci.agent: pcimodules is scanning
more than ...
Jan 22 20:05:07 jamlap /etc/hotplug/pci.agent: Setup snd-es1968 maestro
usb-uhci uhci yenta_socket for PCI slot 03:00.0
Jan 22 20:05:08 jamlap insmod:
/lib/modules/2.4.19-16mdk/kernel/drivers/sound/maestro.o.gz:
init_module: No such device
Jan 22 20:05:08 jamlap insmod: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ
parameters. You may find more information in syslog or the output
from dmesg
Jan 22 20:05:08 jamlap modprobe: modprobe: insmod
/lib/modules/2.4.19-16mdk/kernel/drivers/sound/maestro.o.gz failed
Jan 22 20:05:08 jamlap modprobe: modprobe: insmod maestro failed
Jan 22 20:05:08 jamlap /etc/hotplug/pci.agent: ... can't load module
maestro
Jan 22 20:05:08 jamlap /etc/hotplug/pci.agent: missing kernel or user
mode driver maestro
Jan 22 20:05:08 jamlap /etc/hotplug/pci.agent: ... blacklisted module:
usb-uhciJan 22 20:05:08 jamlap kernel: uhci.c: USB Universal Host
Controller Interface driver v1.1
Jan 22 20:05:08 jamlap insmod:
/lib/modules/2.4.19-16mdk/kernel/drivers/usb/uhci.o.gz: init_module: No
such device
Jan 22 20:05:08 jamlap insmod: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ
parameters. You may find more information in syslog or the output
from dmesg
Jan 22 20:05:08 jamlap modprobe: modprobe: insmod
/lib/modules/2.4.19-16mdk/kernel/drivers/usb/uhci.o.gz failed
Jan 22 20:05:08 jamlap modprobe: modprobe: insmod uhci failed
Jan 22 20:05:08 jamlap /etc/hotplug/pci.agent: ... can't load module
uhci
Jan 22 20:05:08 jamlap /etc/hotplug/pci.agent: missing kernel or user
mode driver uhci
</ouptput>
This is the output from a single insert. Most notable it's uhci that it
can't load... Intresting thing is that uhci is a usb module. My card is
pcmcia..... if I do modprobe uhci I get.
<output>
/lib/modules/2.4.19-16mdk/kernel/drivers/usb/uhci.o.gz: init_module: No
such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
modprobe: insmod /lib/modules/2.4.19-16mdk/kernel/drivers/usb/uhci.o.gz
failed
modprobe: insmod uhci failed
</output>
Ideas? questions? Guffaws?
James
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
