On Thursday 20 February 2003 05:51 pm, J. Craig Woods wrote:
> Sridhar wrote:
> > J. Grant wrote:
> >> Hi,
> >>
> >> I've got one Abit KT7 RAID MB system running stock mdk9 kernel. Its
> >> running, however, the hd speed is slow because it only works with no
> >> dma etc. I am using the correct ata100 cables with only a single drive
> >> on each channel.
> >>
> >> Has anyone else experienced this with this motherboard using the raid
> >> channels?
> >>
> >> Cheers
> >>
> >>
> >> JG
> >>
> >>
> >> Journalled Block Device driver loaded
> >> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> >> hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
> >> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> >> hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
> >> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> >> hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
> >> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> >> hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
> >> ide2: reset: success
> >> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> >> hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
> >> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> >> hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
> >> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> >> hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
> >> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> >> hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
> >> ide2: reset: success
> >
> > Jus wondering, have up updated ur bios.
>
> Just wondering, are you using WD harddrives?
>
> drjung
I was wondering the same thing. I am aware that Andre Hedrick has campaigned
for a while to keep WDs off of udma3 or higher because they don't exactly
comply with the requirements for the CRC protocols for those speeds.
ANd My thoughts fall first to WD when I see {DriveReady SeekComplete} because
that is the only brand on which I have seen it.
Civileme
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
