Thanks!
On 2 jun. 2016, at 03:00, Julius Smith <[email protected]> wrote:
> Yes, the two cases behave surprisingly differently (to me) in the
> time-varying case. Yours is more robust, so I've adopted it as
> follows:
>
> // --- lf_sawpos ---
> // simple sawtooth waveform oscillator between 0 and 1
> lf_sawpos(freq) = frac ~ +(freq/ml.SR) with { // Bart Brouns version
> frac(x) = x - floor(x);
> };
>
> Please let me know if you'd like to see anything written differently.
>
> Thanks,
> - Julius
>
> On Tue, May 31, 2016 at 4:30 AM, Bart Brouns <[email protected]> wrote:
>> Hi Julius,
>>
>> I just tested with moving frequencies and the difference becomes even
>> bigger:
>>
>> (par(i, 1000, my_lf_sawpos(abs((i+10) *lfo) )):>_)/1000
>>
>> (par(i, 1000, lf_sawpos( (i+10) *lfo )):>_)/1000
>>
>> take 30 and 65 % respectively, even with the (usually unneeded) abs.
>>
>>
>> Cheers,
>> Bart.
>
>
>
> --
> Julius O. Smith III <[email protected]>
> Professor of Music and, by courtesy, Electrical Engineering
> CCRMA, Stanford University
> http://ccrma.stanford.edu/~jos/
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
_______________________________________________
Faudiostream-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/faudiostream-users