Mikkel L. Ellertson wrote:
You may want to run ls -l /dev/cdrom to see where it points to. If this was the only device on the secondary IDE controller, and you are not using cable select, then it is possible that the old drive was jumpered as a slave drive, and the new on is jumpered as either master or cable select. That would mess up the cdrom symlink.
Ok, I put both of them on the cable, jumpered as CS, with the CD on the Master, and the DVD on the slave location. I rebooted, and got an entry in my fstab... /dev/cdrom /mnt/cdrom udf,iso9660 noauto,owner,kudzu,ro 0 0 /dev/cdrom1 /mnt/cdrom1 udf,iso9660 noauto,owner,kudzu,ro 0 0 [spaces edited] Also, $ ls -l /dev/cd* lrwxrwxrwx 1 root root 8 Aug 21 19:26 /dev/cdrom -> /dev/hdc lrwxrwxrwx 1 root root 8 Aug 21 19:44 /dev/cdrom1 -> /dev/hdd brw-rw---- 1 root disk 15, 0 Feb 23 2004 /dev/cdu31a brw-rw---- 1 root disk 24, 0 Feb 23 2004 /dev/cdu535 lrwxrwxrwx 1 root root 8 Aug 21 19:44 /dev/cdwriter -> /dev/hdd The CD drive works as expected. The DVD does not. When I put a written CD into the CD drive, it mounts, and shows the label. When I put the same disc into the DVD drive, it brings up the CD Creator box, like it was blank. Closing that, and doing a mount causes the disc to mount and be usable, but the label is not noticed, it mounts just as cdrom1. Mike -- p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);} Oppose globalization and One World Governments like the UN. This message made from 100% recycled bits. You have found the bank of Larn. I speak only for myself, and I am unanimous in that! -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list