I had the same problem after a new
installation of Win 2000 pro. I called Nikon because their instructions say to
install the ASPI32.exe drivers from the Adaptec site. So I went to get them from
the Adaptec site and upon reading the driver info it warns you NOT to install
them on a Win 2000 system or if you have some other specific
software.
Confused, I called Nikon tech assist and
the tech said they were well aware of the Adaptec warning but had had thousands
of installs with only one problem.
So I took the leap and installed the
ASPI32.exe driver and lo and behold the scanner was recognized and I have had no
problems at all.
Hope this helps
Ken
----- Original Message -----
From: "Edwin Eleazer" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, March 10, 2001 10:22
AM
Subject: filmscanners: LS-30 and Windows
2000
> although it recognizes my Adaptec 2930CU SCSI card, and the Coolscan III,
> and I have upgraded the Nikon driver to Win 2000 from the Nikon website,
> neither Vuescan or Nikonscan can find the scanner. I have tried the
> downloads on the Adaptec site, although the 2930 is supported on the Win
> 2000 CD, and even tried it as a 2940UW as that works with Win NT, but
> nothing seems to work.
> Any suggestions?
> Edwin
>
>