This isn't true. The RAID controller or software does the work, and each channel has a master and a slave as normal.
These days with 80-way IDE leads you might as well set both drives to cable select and let the cable decide though. [EMAIL PROTECTED] (Jim Snyder) wrote: > on 11/12/01 10:34 PM, LAURIE SOLOMON at [EMAIL PROTECTED] wrote: > > >> Actually, both must be set up on the same IDE channel as masters. > > > > How does one do that? I thought that you could only have one master > > device > > per channel; and it was the one that was connected to the end of the > > ribbon > > cable and had its jumper set for master. > > > With two disks, you would be correct; but in this case, the two disks > are > going to act as one, so both must be set to be masters. > > Jim Snyder > >
