>The scans delivered to Photoshop seemed overexposed Completely speculative, what is the Photoshop working color space set for? Could it be that this working space is is the problem in that Photoshop is translating the scan input into its working space which is being displayed on the monitor while the scanner output that is not going through Photoshop is being displayed directly in either sRGB or your monitor's default windows or default custom profile?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Alex Zabrovsky Sent: Sunday, April 21, 2002 6:40 AM To: [EMAIL PROTECTED] Subject: [filmscanners] RE: Scanner calibration Well, must admit I cannot complain on the image quality delivered by my IV ED using his default driver NikonScan 3.1.2. Nikon's CMS seems to work good indeed. However, I thought having the scanner calibrated precisely using the Q-60 TI8 slide and appropriate software might create even more precise results, which I would like to compare with driver's native colors interpretation. Frankly, this isn't something pressing me hardly, since the scanner already deliver good results without his profile customization. However I have another issue bothering me a lot. A few days ago I changed my display purchasing new Iiyama VisionMaster 454. It comes with his own setup software (INF file and ICC profile) which I downloaded from their site and installed. into my system (Win98SE). Besides of that, I tweaked the monitor's profile using Adobe Gamma utility and installed it as working monitor's profile. That was the starting point of my troubles. Once I did all that, the scanner started to deliver heavy bluish cast on slides which is easily distinguishable on both preview and scan in Photoshop and to correct it back I had either to play with analog gain feature on RGB or to try to remove that in Photoshop using Curves in RGB channels. That was really frustrating, considering the fact that with the previous monitor I didn't have such problems from the beginning. The friend of mine has recommended to remove this manually created monitor's profile from the system (it is actually started automatically altering the video card's LUT replacing the default Window's values with those generated during my own calibration). Since it is loaded automatically upon Windows startup, to remove it I had to remove the link to this file in System StartUp menu. After I did it, the cast has disappeared indeed for my happiness and the scanned results started to look much more neutral resembling the situation with old monitor. This was relaxing. However, I noticed new effect I didn't pay attention of earlier with new monitor. The scans delivered to Photoshop seemed overexposed (excessive brightness). Trying to lower the brightness (by Analog Gain, Master channel or by Curves tool in Photoshop) helps, but then, opening the pictures in something like ACDS viewer shows much darker image then it appears in Photoshop. That confused me. I was told the ACDs and most other available viewer doesn't support Color Management which means the results aren't corrected by the monitor's profile the Photoshop uses. This is frustrating. The only way left to go is to remove the Iiyama monitor's profile from Display Properties so that the default Window's display profile (if any) would only one for all applications, until I'll acquire monitor calibration hardware/software tool to create precise monitor's profile. Any thoughts ? Regards, Alex Z -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of michael shaffer Sent: Saturday, April 20, 2002 2:53 PM To: [EMAIL PROTECTED] Subject: [filmscanners] RE: Scanner calibration Alex writes ... > Recently I was given the IT8 35mm slide to try out my > IV ED calibration, but I have no calibration software > to handle IT8 pattern. > ... Use littleCMS with care http://www.littlecms.com/ ... the results seem to be respectable, but I doubt if it will produce anything better than the CLUT profiles which cane with your scanner. What scanning software are you going to use it with? What settings? cheerios ... shAf :o) Avalon Peninsula, Newfoundland www.micro-investigations.com (in progress) ---------------------------------------------------------------------------- ------------ Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body ---------------------------------------------------------------------------- ------------ Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body ---------------------------------------------------------------------------------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body