>Do you know where I can find out info regarding OF? I know how to get
>into the Open Firmware, but I don't know what to do from there.
This was posted on the Darwinos-Users list concerning OF:
open firmware commands I am aware of:
mac-boot (boot into MacOS)
reset-all (reboot the machine)
shut-down (halt the machine; shutdown)
printenv (print current machine variables)
setenv (set a machine variable)
devalias (list device aliases; useful for locating other
devices in the machine such as hard drives etc)
common values for HD/CD:(my G4)
ultra0 = hd = master device, primary ATA bus (factory-installed drive)
ultra1 = slave device, primary ATA bus
ide0 = cd = master device, secondary ATA bus (CD/DVD drive)
ide1 = slave device, secondary ATA bus (Zip drive, if installed)
enet = motherboard ethernet device
Hopefully this will help!
Andy Cunningham
-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GU d- s:--@ a- C++++ U*++>$ P L+ E----@ W+++ !N o-- K? w O? M++$ V? PS+++ PE
Y+ PGP++ t+ 5? X R* tv++ b++ DI- D--- G>G+++ e++>e+++@ h++(--) r++ y*
-----END GEEK CODE BLOCK-----
decode---> http://www.ebb.org/ungeek/
PGP Key ID=0x1D519B8D
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Fink-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/fink-users
