Hello,
I restarted my computer and ran fink install xcrysden again with the
updated package using gcc47, and it worked, thanks!
Alexandru
On Wed, Jul 25, 2012 at 10:27 PM, Alexandru Georgescu <
[email protected]> wrote:
> Hello,
>
> I did exactly that, it installed for a while until it reached this point.
> I tried updates etc but they didn't install anything new:
>
>
> gcc -Os -L/sw/lib -o test-vasprintf-posix test-vasprintf-posix.o
> libtests.a ../lib/libm4.a libtests.a
> make check-TESTS
> PASS: test-btowc1.sh
> PASS: test-btowc2.sh
> PASS: test-alloca-opt
> PASS: test-array_list
> PASS: test-array_oset
> PASS: test-avltree_oset
> PASS: test-binary-io.sh
> PASS: test-c-ctype
> PASS: test-cloexec
> PASS: test-dirname
> PASS: test-canonicalize-lgpl
> PASS: test-c-stack.sh
> PASS: test-dup2
> PASS: test-errno
> PASS: test-environ
> PASS: test-c-strcase.sh
> PASS: test-fcntl-h
> PASS: test-fcntl
> PASS: test-fflush
> PASS: test-filenamecat
> PASS: test-closein.sh
> PASS: test-fopen-safer
> PASS: test-fopen
> PASS: test-fflush2.sh
> PASS: test-fpending.sh
> PASS: test-fpurge
> PASS: test-freading
> PASS: test-frexp-nolibm
> PASS: test-freadahead.sh
> PASS: test-frexpl-nolibm
> PASS: test-fseeko.sh
> PASS: test-fseeko2.sh
> PASS: test-ftell2.sh
> PASS: test-ftell.sh
> PASS: test-ftell3
> PASS: test-ftello2.sh
> PASS: test-ftello.sh
> PASS: test-ftello3
> PASS: test-getdtablesize
> PASS: test-gettimeofday
> PASS: test-ignore-value
> PASS: test-isnand-nolibm
> PASS: test-isnanf-nolibm
> PASS: test-getopt
> PASS: test-isnanl-nolibm
> PASS: test-langinfo
> PASS: test-malloc-gnu
> PASS: test-locale
> PASS: test-link
> PASS: test-lstat
> PASS: test-lseek.sh
> PASS: test-linkedhash_list
> PASS: test-math
> PASS: test-mbrtowc1.sh
> PASS: test-mbrtowc3.sh
> PASS: test-mbrtowc2.sh
> PASS: test-mbrtowc4.sh
> SKIP: test-mbrtowc-w32-1.sh
> PASS: test-malloca
> PASS: test-c-stack2.sh
> SKIP: test-mbrtowc-w32-2.sh
> SKIP: test-mbrtowc-w32-3.sh
> SKIP: test-mbrtowc-w32-4.sh
> SKIP: test-mbrtowc-w32-5.sh
> PASS: test-mbsinit.sh
> PASS: test-pipe2
> PASS: test-posix_spawn1
> PASS: test-open
> PASS: test-memchr2
> PASS: test-nl_langinfo.sh
> PASS: test-posix_spawn2
> PASS: test-printf-frexp
> PASS: test-printf-frexpl
> PASS: test-rawmemchr
> PASS: test-quotearg-simple
> PASS: test-sched
> PASS: test-readlink
> PASS: test-rmdir
> PASS: test-rename
> PASS: test-setenv
> PASS: test-sigaction
> PASS: test-setlocale1.sh
> PASS: test-signal
> PASS: test-setlocale2.sh
> PASS: test-spawn
> PASS: test-snprintf
> PASS: test-signbit
> PASS: test-stddef
> PASS: test-stdbool
> PASS: test-stat
> PASS: test-stdio
> PASS: test-stdint
> PASS: test-stdlib
> PASS: test-strerror
> PASS: test-strchrnul
> PASS: test-string
> PASS: test-strsignal
> PASS: test-spawn-pipe.sh
> PASS: test-strtod
> PASS: test-sys_stat
> PASS: test-symlink
> PASS: test-sys_time
> PASS: test-strstr
> PASS: test-sys_wait
> PASS: test-time
> PASS: test-dup-safer
> PASS: test-unistd
> PASS: test-unsetenv
> PASS: test-strnlen
> PASS: test-vasnprintf
> PASS: test-vasprintf
> PASS: test-verify
> PASS: test-version-etc.sh
> PASS: test-wchar
> PASS: test-wcrtomb.sh
> /bin/sh: line 1: 48028 Abort trap: 6 EXEEXT='' srcdir='.'
> LOCALE_FR='fr_FR.ISO8859-1' LOCALE_FR_UTF8='fr_FR.UTF-8'
> LIBSIGSEGV='-lsigsegv' LOCALE_FR='fr_FR.ISO8859-1' LOCALE_TR_UTF8='none'
> LOCALE_FR='fr_FR.ISO8859-1' LOCALE_FR_UTF8='fr_FR.UTF-8'
> LOCALE_JA='ja_JP.eucJP' LOCALE_ZH_CN='zh_CN.GB18030'
> LOCALE_FR_UTF8='fr_FR.UTF-8' LOCALE_FR='fr_FR.ISO8859-1'
> LOCALE_FR_UTF8='fr_FR.UTF-8' LOCALE_FR='fr_FR.ISO8859-1'
> LOCALE_FR_UTF8='fr_FR.UTF-8' LOCALE_JA='ja_JP.eucJP'
> LOCALE_ZH_CN='zh_CN.GB18030'
> abs_aux_dir='/sw/src/fink.build/m4-1.4.16-1/m4-1.4.16/build-aux'
> abs_aux_dir='/sw/src/fink.build/m4-1.4.16-1/m4-1.4.16/build-aux'
> MAKE='make' LOCALE_FR='fr_FR.ISO8859-1' LOCALE_FR_UTF8='fr_FR.UTF-8'
> LOCALE_JA='ja_JP.eucJP' LOCALE_ZH_CN='zh_CN.GB18030' "$tst" >
> test-vasprintf-posix.log-t 2>&1
> FAIL: test-vasprintf-posix
> SKIP: test-wcrtomb-w32-1.sh
> SKIP: test-wcrtomb-w32-2.sh
> SKIP: test-wcrtomb-w32-3.sh
> SKIP: test-wcrtomb-w32-4.sh
> SKIP: test-wcrtomb-w32-5.sh
> PASS: test-wctype-h
> PASS: test-xvasprintf
> PASS: test-vc-list-files-git.sh
> PASS: test-xalloc-die.sh
> PASS: test-verify.sh
> PASS: test-localename
> PASS: test-memchr
> PASS: test-update-copyright.sh
> PASS: test-vc-list-files-cvs.sh
> ===============================
> 1 of 120 tests failed
> (10 tests were not run)
> See tests/test-suite.log
> Please report to [email protected]
> ===============================
> make[6]: *** [test-suite.log] Error 1
> make[5]: *** [check-TESTS] Error 2
> make[4]: *** [check-am] Error 2
> make[3]: *** [check-recursive] Error 1
> make[2]: *** [check] Error 2
> make[1]: *** [check-recursive] Error 1
> make: *** [check] Error 2
> ### execution of make failed, exit code 2
> ### execution of /tmp/fink.1P_9T failed, exit code 2
> Removing runtime build-lock...
> Removing build-lock package...
> /sw/bin/dpkg-lockwait -r fink-buildlock-m4-1.4.16-1
> (Reading database ... 7616 files and directories currently installed.)
> Removing fink-buildlock-m4-1.4.16-1 ...
> Updating the list of locally available binary packages.
> Scanning dists/stable/main/binary-darwin-x86_64
> New package:
> dists/stable/main/binary-darwin-x86_64/base/expat1-shlibs_2.0.1-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/base/expat1_2.0.1-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/base/gettext-tools_0.17-18_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/base/libgettextpo2-dev_0.17-18_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/base/libgettextpo2-shlibs_0.17-18_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/devel/cloog-org-shlibs_0.16.2-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/devel/cloog-org_0.16.2-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/devel/fink-package-precedence_0.14-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/devel/help2man-perl5124_1.37.1-2_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/devel/pkgconfig_0.25-2_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/graphics/freetype219-shlibs_2.4.6-2_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/graphics/freetype219_2.4.6-2_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/graphics/mesa-shlibs_7.0.2-3_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/graphics/mesa_7.0.2-3_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/libs/gmp5-shlibs_5.0.5-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/libs/gmp5_5.0.5-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/libs/libgmpxx5-shlibs_5.0.5-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/libs/libsigsegv2-shlibs_2.6-5_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/libs/libsigsegv2_2.6-5_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/libs/libxml2-bin_2.7.8-202_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/libs/libxml2-shlibs_2.7.8-202_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/libs/libxml2_2.7.8-202_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/libs/readline5-shlibs_5.2.14-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/libs/readline5_5.2.14-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/libs/perlmods/locale-gettext-pm5124_1.05-2_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/sci/glpk-dev_4.44-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/sci/glpk-shlibs_4.44-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/sci/glpk_4.44-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/sci/meschach-shlibs_1.2b-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/sci/meschach_1.2b-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/text/texinfo_4.13-1001_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/utils/liblzma5-shlibs_5.0.4-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/utils/liblzma5_5.0.4-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/utils/lzma_5.0.4-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/utils/xz_5.0.4-1_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/x11/fontconfig-config_2.8.0-8_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/x11/fontconfig2-dev_2.8.0-8_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/x11/fontconfig2-shlibs_2.8.0-8_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/x11/xft2-dev_2.2.0-2_darwin-x86_64.deb
> New package:
> dists/stable/main/binary-darwin-x86_64/x11/xft2-shlibs_2.2.0-2_darwin-x86_64.deb
> Failed: phase testing: m4-1.4.16-1 failed
>
> Before reporting any errors, please run "fink selfupdate" and try again.
> Also try using "fink configure" to set your maximum build jobs to 1 and
> attempt to build the package again.
> If you continue to have issues, please check to see if the FAQ on Fink's
> website solves the problem. If not, ask on one (not both, please) of
> these mailing lists:
>
> The Fink Users List <[email protected]>
> The Fink Beginners List <[email protected]>.
>
> Please try to include the complete error message in your report. This
> generally consists of a compiler line starting with e.g. "gcc" or "g++"
> followed by the actual error output from the compiler.
>
> Also include the following system information:
> Package manager version: 0.34.0
> Distribution version: selfupdate-rsync Wed Jul 25 21:41:10 2012, 10.8,
> x86_64
> Trees: local/main stable/main
> Xcode.app: 4.4
> Xcode command-line tools: 4.4.0.0.1.1249367152
> Max. Fink build jobs: 8
>
>
> Alexandru
>
>
> On Wed, Jul 25, 2012 at 8:57 PM, Alexander Hansen <
> [email protected]> wrote:
>
>> On 7/25/12 3:41 PM, Alexandru Georgescu wrote:
>> > Hello,
>> >
>>
>> <snipo>
>>
>> >
>> > When I tried to run fink install gnu plot I got the following error:
>> > The following build commands failed:
>> > ProcessPCH
>> >
>> /var/folders/b0/2nxk7dk12bv7_bz9hp00fhnm0000kr/C/com.apple.Xcode.600/SharedPrecompiledHeaders/AppKit-gssdenycyjagpfeytutknbxzyggm/AppKit.h.gch
>> > /System/Library/Frameworks/AppKit.framework/Headers/AppKit.h normal
>> > x86_64 objective-c com.apple.compilers.llvmgcc42
>> > (1 failure)
>> > ### execution of /tmp/fink.fxZBz failed, exit code 65
>> > ### execution of /tmp/fink.vIUgb failed, exit code 65
>> > Removing runtime build-lock...
>> > Removing build-lock package...
>> > /sw/bin/dpkg-lockwait -r fink-buildlock-aquaterm-1.0.1-5
>> > (Reading database ... 4615 files and directories currently installed.)
>> > Removing fink-buildlock-aquaterm-1.0.1-5 ...
>> > Updating the list of locally available binary packages.
>> > Scanning dists/stable/main/binary-darwin-x86_64
>> > New package:
>> >
>> dists/stable/main/binary-darwin-x86_64/x11/app-defaults_20010814-12_darwin-x86_64.deb
>> > Failed: phase installing: aquaterm-1.0.1-5 failed
>> >
>> >
>> > Also include the following system information:
>> > Package manager version: 0.34.0
>> > Distribution version: selfupdate-rsync Wed Jul 25 18:18:50 2012, 10.8,
>> > x86_64
>> > Trees: local/main stable/main
>> > Xcode.app: 4.2.1
>> > Xcode command-line tools: 4.2.1
>> > Max. Fink build jobs: 8
>> >
>> > At some point before I ran this same thing and it saw xcode 4.4 I think,
>> > but it gave me the same error (I can't figure out how to switch which
>> > xcode fink sees).
>> >
>> > Sorry for being such a noob at these things, I'm completely lost as to
>> > what I should do and not being able to run xcrysden and gnuplot is
>> > hindering my research...
>> >
>> > Alexandru
>> >
>> >
>> >
>>
>> You can see which Xcode is active via
>>
>> xcode-select -print-path
>>
>> and you can change that with
>>
>> xcode-select -switch /path/to/valid/Xcode.app
>>
>> (i.e. wherever you have your Xcode 4.4 application).
>>
>> fink uses "xcode-select -print-path" to get the diagnostic information
>> above, so it should reflect whatever your system has set up.
>>
>> Once you definitely are pointing to Xcode 4.4 and its command line tools
>> ("fink list xcode" is useful to verify that) then try aquaterm again.
>> --
>> Alexander Hansen, Ph.D.
>> Fink User Liaison
>> My package updates: http://finkakh.wordpress.com/
>>
>
>
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Fink-users mailing list
[email protected]
List archive:
http://news.gmane.org/gmane.os.macosx.fink.user
Subscription management:
https://lists.sourceforge.net/lists/listinfo/fink-users
