On Wed, May 29, 2013 at 5:35 PM, Ryan Finnie <[email protected]> wrote:
> On 05/29/2013 04:09 PM, Peder Stray wrote: > > Seems it is related to USB 3, the usb-storage-devices power up when > > not connected to one of the blue usb-ports on the laptop... found a > > yellow one, and suddenly the screen filled with kernel messages from > sdb > > > > Some told me to look for the xhci kernel module, and it seems it isn't > > present in Finnix... Guess a new build is needed that actually supports > usb3 > > Finnix 108 (kernel 3.8, specifically) includes xhci modules, which > should be loaded by udev as needed. They are not included in the > initrd, but that's because (IIRC from my lab tests) they were not needed > at initrd time to be able to initialize the controller (ehci was > sufficient), then at userland time udev would upgrade it to xhci. Definitly seems it is needed when using grub to loopback-mount an finnix.iso as I do at least :) > From your experience, this may not be the case, unless you're using an > older > Finnix release? > Tested with 108 as I said earlier in the thread. > I'm traveling this week, but will try to dig deeper when I get back, > unless someone else does a better investigation beforehand. Ok, no problems when I actually know what works and not with the current setup, but I'm willing to test if needed later :) -- Peder Stray
_______________________________________________ finnix mailing list [email protected] http://lists.finnix.org/cgi-bin/mailman/listinfo/finnix
