On 24.04.2017 o 10:41, atuncce...@duzen.com.tr [firebird-support] wrote: > We have some desktop applications which are connecting to firebird, started > crashing for a while. > These applications are mostly on our wireless link connected building so > I'm suspicious about the network. > Then I created a new test project. When I run the application, connect to > the database, disconnect the client network just for a second and reconnect > the network again, the database connection is broken and the application > can't continue. > Then I saw a new feature on firebird 2.5 like this: > Immediate Detection of Disconnected Clients on Classic Vladyslav Khorsun > The Classic server now detects immediately when a Classic process has been > broken by a client disconnection. Its response is to terminate any pending > activity, roll back the active transaction and close the network connection. > Tracker reference CORE-818. > Can this be the reason that a short interruption on the network causing the > problems on the application? > Can this feaure be disabled so that I can see if this is the problem or not?
Hi, My answer is based more on the way the networs work than the actual knowledge of FB internals. If you work on a wired network and the network interface is set up to auto detect the link availability (in most cases it is), pulling the network plug out and connecting it back causes the network interface to reset (all sockets are closed, the interface is set up from zero). However, if the network is disrupted somewhere in between the end points (your server and client) but both of them have the physical link up, both the server and the client keep the sockets open (eventually re-transmitting TCP packets after some timeouts), because they simply can't know why there's no traffic on the link - failure or just nothing to say ;). When the network gets operatinal again, it's possible that the database connection actually is still valid and the app keeps working like nothing happened. In case of wireless, every disconnection is like pulling the plug - the interface resets and all sockets are closed. That might explain why your crashes occur mostly on clients connected via wifi. I don't actually think Firebird can detect client disconnection "immediately" when there is no data exchange between the server and the client (it would require some kind of heartbeat increasing traffic and would be based on timeouts, which are tricky), otherwise byzantine network partitions wouldn't be so nasty. hope this helps cheers Tomasz -- __--==============================--__ __--== Tomasz Tyrakowski ==--__ __--== SOL-SYSTEM ==--__ __--== http://www.sol-system.pl ==--__ __--==============================--__