>From nokia support. http://support.nokia.com You must have local serial console access to the unit to perform this procedure. Keyboard and monitor directly connected to the machine will not display the "boot:" line, which means you will not be able to perform this procedure.
1) Boot up in single user mode: To do this reboot or power cycle the machine, When you see the line " boot: " you must enter "-s" before it goes into multiuser mode. (you have about 10 seconds) * on a ip330 or ip650 you need to type boot -s at the BOOTMGR prompt* 2) After it boots, it will ask you "Enter pathname of shell or RETURN for sh:", press Enter key. 3) Type "/etc/overpw" in the # prompt. It will ask if you want continue, type "y". In IPSO 3.1.3 systems and earlier, it will ask you to put a floppy disk into the floppy drive to make sure you have physical access to the box. Put a floppy disk into the floppy drive and press Enter key. IPSO 3.1.4 and later does not ask this question. 4) The admin password defaults to no password for admin. Continue to boot to multiuser mode. 5) Re-config the passwd as usual, in Voyager. Cheers Ad, -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Kevin Timm Sent: 14 October 2001 05:44 To: Tony Carter; [EMAIL PROTECTED] Subject: RE: password reset on ip650 I had to go throug hthis before and it's a pain. There is a flat file where most configuration is stored in. This file you will need to copy to another file and remove the admin password. Once that is done you will need to add it back in it will be similiar to echoing it back to the file but you will need to pipe the password to a command to encrypt the password. If I had one available I could give you more specifics. There is some one alluding to it onan old firewall list that I found that helped. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tony Carter Sent: Saturday, October 13, 2001 7:33 PM To: [EMAIL PROTECTED] Subject: OT: password reset on ip650 Hello All, Sorry for the off topic post but I've search for an answer without luck. I just bought a IP650 from an ISP that just went belly up. What's the procedure for resetting the password? -Tony _______________________________________________ Firewalls mailing list [EMAIL PROTECTED] http://lists.gnac.net/mailman/listinfo/firewalls _______________________________________________ Firewalls mailing list [EMAIL PROTECTED] http://lists.gnac.net/mailman/listinfo/firewalls ********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept by Dimension Data mail system for the presence of computer viruses. www.uk.didata.com ********************************************************************** _______________________________________________ Firewalls mailing list [EMAIL PROTECTED] http://lists.gnac.net/mailman/listinfo/firewalls
