Thanks Kerry Good point about the recommended spec. This is the first CDROM I have created since the days of Windows 98 so I am a bit rusty with regards all the required information that must go on the CDROM sleeve. A lot scarier than online stuff as one small mistake can be costly in terms of reprinting thousands of disk sleeves or disks in this information is included in a readme file on the disk too.
Many thanks for the advice. Paul -----Original Message----- From: flashcoders-boun...@chattyfig.figleaf.com [mailto:flashcoders-boun...@chattyfig.figleaf.com] On Behalf Of al...@cyberiantiger.biz Sent: 18 November 2009 20:41 To: spamtha...@gmail.com; Flash Coders List Subject: Re: [Flashcoders] Advice on minimum specification for cross platform cdrom Paul Steven wrote: > I just wanted to double check this is correct before duplicating a few > thousand CDROM sleeves. > > Minimum system requirements > PC: XP, AMD / Intel, 1.0 Ghz, 256 mb RAM > MAC: 10.4.x, G3 PowerPC / Intel Solo, 1.0 Ghz, 256 mb RAM Bear in mind that minimum spec is just that--the minimum your program will run on. A lot of products will give minimum spec, and recommended spec. Minimum spec may run slow, and some features may not work real well, but it at least runs, if poorly. Recommended spec is, of course, the machine that runs your program smoothly. Cordially, Kerry Thompson _______________________________________________ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders _______________________________________________ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
