flashrom is very x86 centric. It does work on other architectures if you get it to compile. Try to fix the worst compile errors on non-x86 for a full build.
Should work in theory with a default build if you exclude nic3com. Will pretty sure break compilation on Alpha. Signed-off-by: Carl-Daniel Hailfinger <[email protected]> Index: flashrom-ioport_x86_only/hwaccess.c =================================================================== --- flashrom-ioport_x86_only/hwaccess.c (Revision 984) +++ flashrom-ioport_x86_only/hwaccess.c (Arbeitskopie) @@ -26,6 +26,8 @@ #include <errno.h> #include "flash.h" +#if defined(__i386__) || defined(__x86_64__) + #if defined(__FreeBSD__) || defined(__DragonFly__) int io_fd; #endif @@ -54,6 +56,22 @@ #endif } +#elif defined(__powerpc__) || defined(__powerpc64__) || defined(__ppc__) || defined(__ppc64__) + +void get_io_perms(void) +{ +} + +void release_io_perms(void) +{ +} + +#else + +#error Unknown architecture + +#endif + #ifdef __DJGPP__ extern unsigned short segFS; Index: flashrom-ioport_x86_only/hwaccess.h =================================================================== --- flashrom-ioport_x86_only/hwaccess.h (Revision 984) +++ flashrom-ioport_x86_only/hwaccess.h (Arbeitskopie) @@ -31,6 +31,8 @@ #include <pci/pci.h> #endif +#if defined(__i386__) || defined(__x86_64__) + /* for iopl and outb under Solaris */ #if defined (__sun) && (defined(__i386) || defined(__amd64)) #include <strings.h> @@ -162,4 +164,11 @@ int freebsd_wrmsr(int addr, msr_t msr); #endif +#elif defined(__powerpc__) || defined(__powerpc64__) || defined(__ppc__) || defined(__ppc64__) +/* Port I/O is not available on PowerPC. */ + +#else +#error Unknown architecture +#endif + #endif /* !__HWACCESS_H__ */ Index: flashrom-ioport_x86_only/it87spi.c =================================================================== --- flashrom-ioport_x86_only/it87spi.c (Revision 984) +++ flashrom-ioport_x86_only/it87spi.c (Arbeitskopie) @@ -29,6 +29,8 @@ #include "chipdrivers.h" #include "spi.h" +#if defined(__i386__) || defined(__x86_64__) + #define ITE_SUPERIO_PORT1 0x2e #define ITE_SUPERIO_PORT2 0x4e @@ -347,3 +349,5 @@ return 0; } + +#endif Index: flashrom-ioport_x86_only/physmap.c =================================================================== --- flashrom-ioport_x86_only/physmap.c (Revision 984) +++ flashrom-ioport_x86_only/physmap.c (Arbeitskopie) @@ -238,6 +238,8 @@ return physmap_common(descr, phys_addr, len, PHYSMAP_MAYFAIL, PHYSMAP_RO); } +#if defined(__i386__) || defined(__x86_64__) + #ifdef __linux__ /* * Reading and writing to MSRs, however requires instructions rdmsr/wrmsr, @@ -455,4 +457,6 @@ #endif #endif #endif - +#else +/* Does MSR exist on non-x86 architectures? */ +#endif Index: flashrom-ioport_x86_only/nic3com.c =================================================================== --- flashrom-ioport_x86_only/nic3com.c (Revision 984) +++ flashrom-ioport_x86_only/nic3com.c (Arbeitskopie) @@ -23,6 +23,8 @@ #include <sys/types.h> #include "flash.h" +#if defined(__i386__) || defined(__x86_64__) + #define BIOS_ROM_ADDR 0x04 #define BIOS_ROM_DATA 0x08 #define INT_STATUS 0x0e @@ -112,3 +114,7 @@ OUTL((uint32_t)addr, io_base_addr + BIOS_ROM_ADDR); return INB(io_base_addr + BIOS_ROM_DATA); } + +#else +#error Unknown architecture +#endif Index: flashrom-ioport_x86_only/wbsio_spi.c =================================================================== --- flashrom-ioport_x86_only/wbsio_spi.c (Revision 984) +++ flashrom-ioport_x86_only/wbsio_spi.c (Arbeitskopie) @@ -23,6 +23,8 @@ #include "chipdrivers.h" #include "spi.h" +#if defined(__i386__) || defined(__x86_64__) + #define WBSIO_PORT1 0x2e #define WBSIO_PORT2 0x4e @@ -199,3 +201,5 @@ return spi_chip_write_1(flash, buf); } + +#endif Index: flashrom-ioport_x86_only/chipset_enable.c =================================================================== --- flashrom-ioport_x86_only/chipset_enable.c (Revision 984) +++ flashrom-ioport_x86_only/chipset_enable.c (Arbeitskopie) @@ -34,6 +34,8 @@ #include <fcntl.h> #include "flash.h" +#if defined(__i386__) || defined(__x86_64__) + extern int ichspi_lock; static int enable_flash_ali_m1533(struct pci_dev *dev, const char *name) @@ -1285,8 +1287,11 @@ return 0; } +#endif + /* Please keep this list alphabetically sorted by vendor/device. */ const struct penable chipset_enables[] = { +#if defined(__i386__) || defined(__x86_64__) {0x10B9, 0x1533, OK, "ALi", "M1533", enable_flash_ali_m1533}, {0x1022, 0x7440, OK, "AMD", "AMD-768", enable_flash_amd8111}, {0x1022, 0x7468, OK, "AMD", "AMD8111", enable_flash_amd8111}, @@ -1417,7 +1422,7 @@ {0x1106, 0x0596, OK, "VIA", "VT82C596", enable_flash_amd8111}, {0x1106, 0x0586, OK, "VIA", "VT82C586A/B", enable_flash_amd8111}, {0x1106, 0x0686, NT, "VIA", "VT82C686A/B", enable_flash_amd8111}, - +#endif {}, }; Index: flashrom-ioport_x86_only/board_enable.c =================================================================== --- flashrom-ioport_x86_only/board_enable.c (Revision 984) +++ flashrom-ioport_x86_only/board_enable.c (Arbeitskopie) @@ -28,6 +28,7 @@ #include <fcntl.h> #include "flash.h" +#if defined(__i386__) || defined(__x86_64__) /* * Helper functions for many Winbond Super I/Os of the W836xx range. */ @@ -1299,6 +1300,8 @@ return it8712f_gpio_set(32, 1); } +#endif + /** * Below is the list of boards which need a special "board enable" code in * flashrom before their ROM chip can be accessed/written to. @@ -1342,6 +1345,7 @@ struct board_pciid_enable board_pciid_enables[] = { /* first pci-id set [4], second pci-id set [4], dmi identifier coreboot id [2], vendor name board name max_rom_... OK? flash enable */ +#if defined(__i386__) || defined(__x86_64__) {0x10DE, 0x0547, 0x147B, 0x1C2F, 0x10DE, 0x0548, 0x147B, 0x1C2F, NULL, NULL, NULL, "Abit", "AN-M2", 0, NT, nvidia_mcp_gpio2_raise}, {0x8086, 0x2926, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, NULL, "Abit", "IP35", 0, OK, intel_ich_gpio16_raise}, {0x8086, 0x2930, 0x147b, 0x1083, 0x10ec, 0x8167, 0x147b, 0x1083, NULL, NULL, NULL, "Abit", "IP35 Pro", 0, OK, intel_ich_gpio16_raise}, @@ -1407,7 +1411,7 @@ {0x1106, 0x3123, 0x1106, 0x3123, 0x1106, 0x3059, 0x1106, 0x4161, NULL, NULL, NULL, "Termtek", "TK-3370 (Rev:2.5B)", 0, OK, w836xx_memw_enable_4e}, {0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, NULL, "VIA", "EPIA M/MII/...", 0, OK, via_vt823x_gpio15_raise}, {0x1106, 0x0259, 0x1106, 0x3227, 0x1106, 0x3065, 0x1106, 0x3149, NULL, NULL, NULL, "VIA", "EPIA-N/NL", 0, OK, via_vt823x_gpio9_raise}, - +#endif { 0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL, 0, NT, NULL}, /* end marker */ }; -- http://www.hailfinger.org/ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
