What does "/home/barry/flashrom-0.9.4/flashrom -R" show?

于 2011年12月11日 20:32, Barry Krauter 写道:
Hi Carl-Daniel

I got the 9.1 version from Ubuntu Synaptic.



I went to your website and downloaded flashrom-0.9.4.tar.bz2. I copied file to /home/barry

in Terminal I did |$ tar jxf /home/barry/flashrom-0.9.4.tar.bz2|

This created /home/barry/flashrom-0.9.4 directory

I then did

cd /home/barry/flashrom-0.9.4

then

|# ./configure
# make
# make install|

These commands executed with no messages.

When i do command flashrom -R I still see version 9.1.

Any suggestions?

Thanks

Barry

On Sun, Dec 11, 2011 at 8:54 PM, Carl-Daniel Hailfinger <[email protected] <mailto:[email protected]>> wrote:

    Hi Barry,

    it seems you're using a very old flashrom version. Could you please
    retry with latest flashrom or at least version 0.9.4? That might
    fix the
    issue you're seeing.

    Am 12.12.2011 01:19 schrieb Barry Krauter:
    > Attempting to replace currbios with 661VS155.BIN upgraded Bios
    for Shuttle
    > 661V31 motherboard using 3com NIC card.
    >
    > Can you tell me why this fails?
    >
    > barry@baerry-desktop:~$ sudo flashrom -p nic3com -w
    /home/barry/661VS155.BIN
    > flashrom v0.9.1-r946
    > Found "3COM 3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX"
    (10b7:9055, BDF 06:02.0).
    > Calibrating delay loop... OK.
    > Found chip "SST SST39SF020A" (256 KB, Parallel) at physical
    address 0xfffc0000.

    That flash chip is marked as supported in latest flashrom.

    Regards,
    Carl-Daniel

    --
    http://www.hailfinger.org/



_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom



_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom

Reply via email to