hello ; by this i report a successful read of Winbond flash chip "W25Q128.W" (16384 kB, SPI) board : NOKIA phone 3310 (2017) TA-1030 using loader from : https://github.com/xobs/fernly patch applied to flashrom : https://github.com/xobs/fernly/blob/master/flashrom-fernvale.patch thankd: attached is th log: ------------------------------------------------------------------------------------------- dr@dr-VirtualBox:~/fernly-master/flashrom-1.0$ sudo ./flashrom --programmer fernvale_spi:dev=/dev/fernvale --read flash.dat flashrom v1.0 on Linux 4.15.0-45-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found Winbond flash chip "W25Q128.W" (16384 kB, SPI) on fernvale_spi. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to [email protected] if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Reading flash... done.
_______________________________________________ flashrom mailing list -- [email protected] To unsubscribe send an email to [email protected]
