Dear FlashromTeam,
if it helps any, (ASUS-H110M-E M.2 board with GD25B128CPIG 16MB bios chip)
flashrom -p internal
flashrom v1.1-rc1-6-g7eb38aa on Linux 5.1.6-gnu-1 (x86_64)
flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found chipset "Intel H110".
This chipset is marked as untested. If you are using an up-to-date version
of flashrom *and* were (not) able to successfully update your firmware with
it,
then please email a report to [email protected] including a verbose
(-V) log.
Thank you!
Enabling flash write... Warning: BIOS region SMM protection is enabled!
Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed.
New value is 0xaa.
SPI Configuration is locked down.
FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-only.
FREG2: Management Engine region (0x00001000-0x0027ffff) is read-only.
Not all flash regions are freely accessible by flashrom. This is most likely
due to an active ME. Please see https://flashrom.org/ME for details.
At least some flash regions are write protected. For write operations,
you should use a flash layout and include only writable regions. See
manpage for more details.
Enabling hardware sequencing because some important opcode is locked.
PROBLEMS, continuing anyway
Found Programmer flash chip "Opaque flash chip" (16384 kB,
Programmer-specific) mapped at physical address 0x0000000000000000.
No operations were specified.
flashrom v1.1-rc1-6-g7eb38aa on Linux 5.1.6-gnu-1 (x86_64)
flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.6.2, GCC 8.3.0, little endian
Command line (3 args): flashrom -p internal -V
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Initializing internal programmer
/sys/class/mtd/mtd0 does not exist
No coreboot table found.
Using Internal DMI decoder.
DMI string chassis-type: "Desktop"
DMI string system-manufacturer: "System manufacturer"
DMI string system-product-name: "System Product Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK COMPUTER INC."
DMI string baseboard-product-name: "H110M-E/M.2"
DMI string baseboard-version: "Rev X.0x"
Found chipset "Intel H110" with PCI ID 8086:a143.
This chipset is marked as untested. If you are using an up-to-date version
of flashrom *and* were (not) able to successfully update your firmware with it,
then please email a report to [email protected] including a verbose (-V)
log.
Thank you!
Enabling flash write... BIOS_SPI_BC = 0xaaa: BIOS Interface Lock-Down: enabled,
Boot BIOS Straps: 0x0 (SPI)
Top Swap: not enabled
SPI Read Configuration: prefetching enabled, caching enabled,
BIOS_CNTL = 0xaa: BIOS Lock Enable: enabled, BIOS Write Enable: disabled
SPIBAR = 0x00007f237b220000 (phys = 0xfe010000)
0x04: 0xe004 (HSFS)
HSFS: FDONE=0, FCERR=0, AEL=1, SCIP=0, PRR34_LOCKDN=0, WRSDIS=0, FDOPSS=1,
FDV=1, FLOCKDN=1
SPI Configuration is locked down.
Reading OPCODES... done
0x06: 0x0100 (HSFC)
HSFC: FGO=0, HSFC=0, WET=0, FDBC=1, SME=0
0x0c: 0x00000000 (DLOCK)
DLOCK: BMWAG_LOCKDN=0, BMRAG_LOCKDN=0, SBMWAG_LOCKDN=0, SBMRAG_LOCKDN=0,
PR0_LOCKDN=0, PR1_LOCKDN=0, PR2_LOCKDN=0, PR3_LOCKDN=0, PR4_LOCKDN=0,
SSEQ_LOCKDN=0
0x50: 0x00004acf (FRAP)
BMWAG 0x00, BMRAG 0x00, BRWA 0x4a, BRRA 0xcf
0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is
read-only.
0x58: 0x0fff0280 FREG1: BIOS region (0x00280000-0x00ffffff) is read-write.
0x5C: 0x027f0001 FREG2: Management Engine region (0x00001000-0x0027ffff) is
read-only.
Not all flash regions are freely accessible by flashrom. This is most likely
due to an active ME. Please see https://flashrom.org/ME for details.
0xa0: 0x90 (SSFS)
SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=1
0xa1: 0xfe0000 (SSFC)
SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=6
0xa4: 0x0000 (PREOP)
0xa6: 0x0000 (OPTYPE)
0xa8: 0x00000000 (OPMENU)
0xac: 0x00000000 (OPMENU+4)
Enabling hardware sequencing because some important opcode is locked.
PROBLEMS, continuing anyway
The following protocols are supported: Parallel, LPC, FWH, Programmer-specific.
Probing for Programmer Opaque flash chip, 0 kB: Hardware sequencing reports 1
attached SPI flash chip with a density of 16384 kB.
Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific)
mapped at physical address 0x0000000000000000.
Probing for AMD Am29F010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F040, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F080, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1
is normal flash content, id2 is normal flash content
Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1
is normal flash content, id2 is normal flash content
Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1
is normal flash content, id2 is normal flash content
Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49(H)F010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1
is normal flash content, id2 is normal flash content
Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F080, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F080T, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x8a, id2 0x86, id1 is
normal flash content, id2 is normal flash content
Probing for Atmel AT49LH00B4, 512 kB: probe_82802ab: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49LH004, 512 kB: probe_82802ab: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ESMT F49B002UA, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1
is normal flash content, id2 is normal flash content
Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x8a, id2
0x86, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x8a, id2
0x86, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29LV040(A), 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0x1f61, id2 0x00ed
Probing for Eon EN29GL064(A)B, 8192 kB: probe_jedec_29gl: man_id 0x1f, dev_id
0x261ca9, man_id seems to be normal flash content, dev_id seems to be normal
flash content
Probing for Eon EN29GL064(A)T, 8192 kB: probe_jedec_29gl: man_id 0x1f, dev_id
0x261ca9, man_id seems to be normal flash content, dev_id seems to be normal
flash content
Probing for Eon EN29GL064H/L, 8192 kB: probe_jedec_29gl: man_id 0x1f, dev_id
0x261ca9, man_id seems to be normal flash content, dev_id seems to be normal
flash content
Probing for Eon EN29GL128, 16384 kB: probe_jedec_29gl: man_id 0xff, dev_id
0xffffff, man_id parity violation, man_id seems to be normal flash content,
dev_id seems to be normal flash content
Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x00, id2
0xeb, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x00, id2
0xeb, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Fujitsu MBM29F400BC, 512 kB: probe_jedec_common: id1 0x00, id2
0x0a, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Fujitsu MBM29F400TC, 512 kB: probe_jedec_common: id1 0x00, id2
0x0a, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Fujitsu MBM29LV160BE, 2048 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Fujitsu MBM29LV160TE, 2048 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0xeb, id2
0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0xeb, id2
0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x8a, id2
0x86, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x00, id2
0xeb, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x00, id2
0xeb, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x00, id2
0x0a, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x00, id2
0x0a, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ISSI IS29GL064B, 8192 kB: probe_jedec_29gl: man_id 0x1f, dev_id
0x261ca9, man_id seems to be normal flash content, dev_id seems to be normal
flash content
Probing for ISSI IS29GL064T, 8192 kB: probe_jedec_29gl: man_id 0x1f, dev_id
0x261ca9, man_id seems to be normal flash content, dev_id seems to be normal
flash content
Probing for ISSI IS29GL064H/L, 8192 kB: probe_jedec_29gl: man_id 0x1f, dev_id
0x261ca9, man_id seems to be normal flash content, dev_id seems to be normal
flash content
Probing for ISSI IS29GL128H/L, 16384 kB: probe_jedec_29gl: man_id 0xff, dev_id
0xffffff, man_id parity violation, man_id seems to be normal flash content,
dev_id seems to be normal flash content
Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0x8a, id2
0x86, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0x8a, id2
0x86, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F022(N)B, 256 kB: probe_jedec_common: id1 0x8a, id2
0x86, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F022(N)T, 256 kB: probe_jedec_common: id1 0x8a, id2
0x86, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29GL320EB, 4096 kB: probe_jedec_29gl: man_id 0x00,
dev_id 0x000000, man_id parity violation, man_id seems to be normal flash
content, dev_id seems to be normal flash content
Probing for Macronix MX29GL320ET, 4096 kB: probe_jedec_29gl: man_id 0x00,
dev_id 0x000000, man_id parity violation, man_id seems to be normal flash
content, dev_id seems to be normal flash content
Probing for Macronix MX29GL320EH/L, 4096 kB: probe_jedec_29gl: man_id 0x00,
dev_id 0x000000, man_id parity violation, man_id seems to be normal flash
content, dev_id seems to be normal flash content
Probing for Macronix MX29GL640EB, 8192 kB: probe_jedec_29gl: man_id 0x1f,
dev_id 0x261ca9, man_id seems to be normal flash content, dev_id seems to be
normal flash content
Probing for Macronix MX29GL640ET, 8192 kB: probe_jedec_29gl: man_id 0x1f,
dev_id 0x261ca9, man_id seems to be normal flash content, dev_id seems to be
normal flash content
Probing for Macronix MX29GL640EH/L, 8192 kB: probe_jedec_29gl: man_id 0x1f,
dev_id 0x261ca9, man_id seems to be normal flash content, dev_id seems to be
normal flash content
Probing for Macronix MX29GL128F, 16384 kB: probe_jedec_29gl: man_id 0xff,
dev_id 0xffffff, man_id parity violation, man_id seems to be normal flash
content, dev_id seems to be normal flash content
Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0x00, id2
0xeb, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0x00, id2
0xeb, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0xeb, id2
0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0x8a, id2
0x86, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information,
using default 10ms/40us. probe_jedec_common: id1 0x8a, id2 0x86, id1 is normal
flash content, id2 is normal flash content
Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information,
using default 10ms/40us. probe_jedec_common: id1 0x8a, id2 0x86, id1 is normal
flash content, id2 is normal flash content
Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1
is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1
is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1
is normal flash content, id2 is normal flash content
Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1
is normal flash content, id2 is normal flash content
Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x83, id2 0xcd,
id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1
is normal flash content, id2 is normal flash content
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing
information, using default 10ms/40us. probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1 is
normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1
is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F400BB, 512 kB: probe_jedec_common: id1 0x00, id2 0x0a, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F400BT, 512 kB: probe_jedec_common: id1 0x00, id2 0x0a, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x00, id2 0xeb, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x8a, id2 0x86, id1 is
normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity
violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x00, id2 0xeb, id1 parity
violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity
violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW080, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common:
id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common:
id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common:
id1 0x8a, id2 0x86, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common:
id1 0x8a, id2 0x86, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common:
id1 0x00, id2 0xeb, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common:
id1 0x00, id2 0xeb, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common:
id1 0x00, id2 0xeb, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common:
id1 0x00, id2 0xeb, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1
is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86, id1
is normal flash content, id2 is normal flash content
Probing for Winbond W29C512A/W29EE512, 64 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old
Winbond W29* probe method disabled because the probing sequence puts the AMIC
A49LF040A in a funky state. Use 'flashrom -c
W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip.
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB:
probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal
flash content, id2 is normal flash content
Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0x8a,
id2 0x86, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29GL032CB, 4096 kB: probe_jedec_29gl: man_id 0x00, dev_id
0x000000, man_id parity violation, man_id seems to be normal flash content,
dev_id seems to be normal flash content
Probing for Winbond W29GL032CT, 4096 kB: probe_jedec_29gl: man_id 0x00, dev_id
0x000000, man_id parity violation, man_id seems to be normal flash content,
dev_id seems to be normal flash content
Probing for Winbond W29GL032CH/L, 4096 kB: probe_jedec_29gl: man_id 0x00,
dev_id 0x000000, man_id parity violation, man_id seems to be normal flash
content, dev_id seems to be normal flash content
Probing for Winbond W29GL064CB, 8192 kB: probe_jedec_29gl: man_id 0x1f, dev_id
0x261ca9, man_id seems to be normal flash content, dev_id seems to be normal
flash content
Probing for Winbond W29GL064CT, 8192 kB: probe_jedec_29gl: man_id 0x1f, dev_id
0x261ca9, man_id seems to be normal flash content, dev_id seems to be normal
flash content
Probing for Winbond W29GL064CH/L, 8192 kB: probe_jedec_29gl: man_id 0x1f,
dev_id 0x261ca9, man_id seems to be normal flash content, dev_id seems to be
normal flash content
Probing for Winbond W29GL128C, 16384 kB: probe_jedec_29gl: man_id 0xff, dev_id
0xffffff, man_id parity violation, man_id seems to be normal flash content,
dev_id seems to be normal flash content
Probing for Winbond W39F010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39L010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39L020, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x00, id2 0xeb,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x8a, id2 0x86,
id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1
0x00, id2 0xeb, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific).
No operations were specified.
Restoring PCI config space for 00:1f:5 reg 0xdc
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.
Table at 0xD7A02000.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 3610
Release Date: 03/29/2018
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 16 MB
Characteristics:
PCI is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 5.12
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: System manufacturer
Product Name: System Product Name
Version: System Version
Serial Number: System Serial Number
UUID: ae57f4a0-b05e-11e5-b06e-107b441896bd
Wake-up Type: Power Switch
SKU Number: SKU
Family: To be filled by O.E.M.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: H110M-E/M.2
Version: Rev X.0x
Serial Number: 170604567702251
Asset Tag: Default string
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Default string
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
Manufacturer: Default string
Type: Desktop
Lock: Not Present
Version: Default string
Serial Number: Default string
Asset Tag: Default string
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
SKU Number: Default string
Handle 0x0004, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0005, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Keyboard
Internal Connector Type: None
External Reference Designator: PS/2 Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0006, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3_34
Internal Connector Type: None
External Reference Designator: USB3_34
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB78
Internal Connector Type: None
External Reference Designator: USB78
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LAN_USB56
Internal Connector Type: None
External Reference Designator: LAN_USB56
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: AUDIO
Internal Connector Type: None
External Reference Designator: AUDIO
External Connector Type: Other
Port Type: Audio Port
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: HDMI
Internal Connector Type: None
External Reference Designator: HDMI port
External Connector Type: Other
Port Type: Other
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: VGA
Internal Connector Type: None
External Reference Designator: VGA port
External Connector Type: None
Port Type: Other
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA6G_1
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA6G_2
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA6G_3
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA6G_4
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB910
Internal Connector Type: Access Bus (USB)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3_12
Internal Connector Type: Access Bus (USB)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CPU_FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CHA_FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM
Internal Connector Type: DB-9 male
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Serial Port 16550A Compatible
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: AAFP
Internal Connector Type: Mini Jack (headphones)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PANEL
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SPDIF_OUT
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: M.2
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0019, DMI type 9, 17 bytes
System Slot Information
Designation: PCIEX16_1
Type: x16 PCI Express
Current Usage: In Use
Length: Long
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:01:01.0
Handle 0x001A, DMI type 9, 17 bytes
System Slot Information
Designation: PCIEX1_1
Type: x1 PCI Express
Current Usage: Available
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:04:1d.0
Handle 0x001B, DMI type 9, 17 bytes
System Slot Information
Designation: PCIEX1_2
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:ff:1d.1
Handle 0x001C, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: To Be Filled By O.E.M.
Handle 0x001D, DMI type 11, 5 bytes
OEM Strings
String 1: Default string
String 2: Default string
String 3: $(ASUS_CODE_NAME)
String 4: Default string
String 5: FFFFFFFFFFFFF
String 6: FFFFFFFFFFFFF
String 7: FFFFFFFFFFFFF
String 8: Default string
Handle 0x001E, DMI type 12, 5 bytes
System Configuration Options
Option 1: SMI:00B29C05
Option 2: DSN: .
Option 3: DSN: .
Option 4: DSN: .
Handle 0x001F, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x0020, DMI type 34, 11 bytes
Management Device
Description: Nuvoton NCT5539D
Type: Other
Address: 0x00000295
Address Type: I/O Port
Handle 0x0021, DMI type 26, 22 bytes
Voltage Probe
Description: LM78A
Location: Motherboard
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x0022, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6
Handle 0x0023, DMI type 35, 11 bytes
Management Device Component
Description: Default string
Management Device Handle: 0x0020
Component Handle: 0x0021
Threshold Handle: 0x0022
Handle 0x0024, DMI type 28, 22 bytes
Temperature Probe
Description: LM78A
Location: Motherboard
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x0025, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6
Handle 0x0026, DMI type 35, 11 bytes
Management Device Component
Description: Default string
Management Device Handle: 0x0020
Component Handle: 0x0024
Threshold Handle: 0x0025
Handle 0x0027, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x0024
Type: Power Supply Fan
Status: OK
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Cooling Dev 1
Handle 0x0028, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6
Handle 0x0029, DMI type 35, 11 bytes
Management Device Component
Description: Default string
Management Device Handle: 0x0020
Component Handle: 0x0027
Threshold Handle: 0x0028
Handle 0x002A, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x0024
Type: Power Supply Fan
Status: OK
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Not Specified
Handle 0x002B, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6
Handle 0x002C, DMI type 35, 11 bytes
Management Device Component
Description: Default string
Management Device Handle: 0x0020
Component Handle: 0x002A
Threshold Handle: 0x002B
Handle 0x002D, DMI type 29, 22 bytes
Electrical Current Probe
Description: ABC
Location: Motherboard
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x002E, DMI type 36, 16 bytes
Management Device Threshold Data
Handle 0x002F, DMI type 35, 11 bytes
Management Device Component
Description: Default string
Management Device Handle: 0x0020
Component Handle: 0x002D
Threshold Handle: 0x002E
Handle 0x0030, DMI type 26, 22 bytes
Voltage Probe
Description: LM78A
Location: Power Unit
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x0031, DMI type 28, 22 bytes
Temperature Probe
Description: LM78A
Location: Power Unit
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x0032, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x0031
Type: Power Supply Fan
Status: OK
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Cooling Dev 1
Handle 0x0033, DMI type 29, 22 bytes
Electrical Current Probe
Description: ABC
Location: Power Unit
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x0034, DMI type 39, 22 bytes
System Power Supply
Power Unit Group: 1
Location: To Be Filled By O.E.M.
Name: To Be Filled By O.E.M.
Manufacturer: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Model Part Number: To Be Filled By O.E.M.
Revision: To Be Filled By O.E.M.
Max Power Capacity: Unknown
Status: Present, OK
Type: Switching
Input Voltage Range Switching: Auto-switch
Plugged: Yes
Hot Replaceable: No
Input Voltage Probe Handle: 0x0030
Cooling Device Handle: 0x0032
Input Current Probe Handle: 0x0033
Handle 0x0035, DMI type 40, 32 bytes
Additional Information 1
Referenced Handle: 0x001c
Referenced Offset: 0x01
String: To Be Filled By O.E.M. 1
Value: 0x00000000
Additional Information 2
Referenced Handle: 0x0001
Referenced Offset: 0x0f
String: Not Specified
Value: 0x0000001e
Additional Information 3
Referenced Handle: 0x0040
Referenced Offset: 0x01
String: Mordor
Value: 0x00000000
Handle 0x0036, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard IGD
Type: Video
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:02.0
Handle 0x0037, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard LAN
Type: Ethernet
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:19.0
Handle 0x0038, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard 1394
Type: Other
Status: Enabled
Type Instance: 1
Bus Address: 0000:03:1c.2
Handle 0x0039, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 32 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x003A, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0039
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: Unknown
Set: None
Locator: DIMM_A1
Bank Locator: BANK 0
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Rank: Unknown
Configured Memory Speed: Unknown
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
Handle 0x003B, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0039
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 8192 MB
Form Factor: DIMM
Set: None
Locator: DIMM_B1
Bank Locator: BANK 2
Type: DDR4
Type Detail: Synchronous
Speed: 2400 MT/s
Manufacturer: Patriot
Serial Number: 00000000
Asset Tag: 9876543210
Part Number: PSD48G240082
Rank: 2
Configured Memory Speed: 2400 MT/s
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: 1.2 V
Handle 0x003C, DMI type 19, 31 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x001FFFFFFFF
Range Size: 8 GB
Physical Array Handle: 0x0039
Partition Width: 1
Handle 0x003D, DMI type 14, 8 bytes
Group Associations
Name: $MEI
Items: 1
0x0000 (OEM-specific)
Handle 0x003E, DMI type 219, 81 bytes
OEM-specific Type
Header and Data:
DB 51 3E 00 01 03 01 04 20 02 80 02 01 65 30 20
00 00 00 00 60 08 00 00 00 00 00 00 00 00 40 02
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF 03 00 00 00 80 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00
Strings:
MEI1
MEI2
MEI3
Handle 0x003F, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 kB
Maximum Size: 128 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Parity
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0040, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 kB
Maximum Size: 512 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0041, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3 Cache
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 3072 kB
Maximum Size: 3072 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Multi-bit ECC
System Type: Unified
Associativity: 12-way Set-associative
Handle 0x0042, DMI type 4, 48 bytes
Processor Information
Socket Designation: LGA1151
Type: Central Processor
Family: Core i3
Manufacturer: Intel(R) Corporation
ID: E9 06 09 00 FF FB EB BF
Signature: Type 0, Family 6, Model 158, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz
Voltage: 1.1 V
External Clock: 100 MHz
Max Speed: 8300 MHz
Current Speed: 3900 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x003F
L2 Cache Handle: 0x0040
L3 Cache Handle: 0x0041
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Core Count: 2
Core Enabled: 2
Thread Count: 4
Characteristics:
64-bit capable
Multi-Core
Hardware Thread
Execute Protection
Enhanced Virtualization
Power/Performance Control
Handle 0x0043, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x001FFFFFFFF
Range Size: 8 GB
Physical Device Handle: 0x003B
Memory Array Mapped Address Handle: 0x003C
Partition Row Position: Unknown
Handle 0x0044, DMI type 221, 26 bytes
OEM-specific Type
Header and Data:
DD 1A 44 00 03 01 00 01 00 05 00 00 02 00 00 00
00 84 00 03 00 00 05 00 00 00
Strings:
Reference Code - CPU
uCode Version
TXT ACM version
Handle 0x0045, DMI type 221, 61 bytes
OEM-specific Type
Header and Data:
DD 3D 45 00 08 01 00 01 00 05 00 00 02 03 FF FF
FF FF FF 04 00 FF FF FF 31 00 05 00 FF FF FF 31
00 06 00 FF FF FF FF FF 07 00 3E 00 00 00 00 08
00 34 00 00 00 00 09 00 0B 00 00 00 00
Strings:
Reference Code - SKL PCH
PCH-CRID Status
Disabled
PCH-CRID Original Value
PCH-CRID New Value
OPROM - RST - RAID
SKL PCH H Bx Hsio Version
SKL PCH H Dx Hsio Version
KBL PCH H Ax Hsio Version
Handle 0x0046, DMI type 221, 54 bytes
OEM-specific Type
Header and Data:
DD 36 46 00 07 01 00 01 00 05 00 00 02 00 01 00
05 03 00 03 00 01 00 05 00 00 04 05 FF FF FF FF
FF 06 00 FF FF FF 06 00 07 00 FF FF FF 06 00 08
00 FF FF FF 02 03
Strings:
Reference Code - SA - System Agent
Reference Code - MRC
SA - PCIe Version
SA-CRID Status
Disabled
SA-CRID Original Value
SA-CRID New Value
OPROM - VBIOS
Handle 0x0047, DMI type 221, 103 bytes
OEM-specific Type
Header and Data:
DD 67 47 00 0E 01 00 00 00 00 00 00 02 00 FF FF
FF FF FF 03 04 FF FF FF FF FF 05 06 FF FF FF FF
FF 07 08 FF FF FF FF FF 09 00 00 00 00 00 00 0A
00 FF FF FF FF FF 0B 00 FF FF 00 00 00 0C 00 FF
FF FF FF FF 0D 00 02 00 00 00 00 0E 00 FF FF FF
FF FF 0F 00 FF FF FF FF FF 10 11 01 03 03 01 00
12 00 00 07 03 00 00
Strings:
Lan Phy Version
Sensor Firmware Version
Debug Mode Status
Disabled
Performance Mode Status
Disabled
Debug Use USB(Disabled:Serial)
Disabled
ICC Overclocking Version
UNDI Version
EC FW Version
GOP Version
BIOS Guard Version
Base EC FW Version
EC-EC Protocol Version
Royal Park Version
BP1.3.3.0_RP01
Platform Version
Handle 0x0048, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 48 00 00 00
Handle 0x0049, DMI type 14, 17 bytes
Group Associations
Name: Firmware Version Info
Items: 4
0x0044 (OEM-specific)
0x0045 (OEM-specific)
0x0046 (OEM-specific)
0x0047 (OEM-specific)
Handle 0x004A, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 8
en|US|iso8859-1
fr|FR|iso8859-1
zh|CN|unicode
<BAD INDEX>
<BAD INDEX>
<BAD INDEX>
<BAD INDEX>
<BAD INDEX>
Currently Installed Language: en|US|iso8859-1
Handle 0x004B, DMI type 127, 4 bytes
End Of Table
_______________________________________________
flashrom mailing list -- [email protected]
To unsubscribe send an email to [email protected]
