Though external reading shows, flashrom --programmer linux_spi:dev=/dev/spidev0.0,spispeed=2048 flashrom v1.1-rc1-6-g7eb38aa on Linux 4.19.46-v7+ (armv7l) flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found GigaDevice flash chip "GD25B128B/GD25Q128B" (16384 kB, SPI) on linux_spi. Found GigaDevice flash chip "GD25Q128C" (16384 kB, SPI) on linux_spi. Multiple flash chip definitions match the detected chip(s): "GD25B128B/GD25Q128B", "GD25Q128C" Please specify which chip definition to use with the -c <chipname> option. On Thu, Jun 6, 2019 at 5:28 PM Pavel Sayekat <[email protected]> wrote: > Dear FlashromTeam, > if it helps any, (ASUS-H110M-E M.2 board with GD25B128CPIG 16MB bios chip) > > flashrom -p internal > flashrom v1.1-rc1-6-g7eb38aa on Linux 5.1.6-gnu-1 (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Found chipset "Intel H110". > This chipset is marked as untested. If you are using an up-to-date version > of flashrom *and* were (not) able to successfully update your firmware > with it, > then please email a report to [email protected] including a verbose > (-V) log. > Thank you! > Enabling flash write... Warning: BIOS region SMM protection is enabled! > Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed. > New value is 0xaa. > SPI Configuration is locked down. > FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-only. > FREG2: Management Engine region (0x00001000-0x0027ffff) is read-only. > Not all flash regions are freely accessible by flashrom. This is most > likely > due to an active ME. Please see https://flashrom.org/ME for details. > At least some flash regions are write protected. For write operations, > you should use a flash layout and include only writable regions. See > manpage for more details. > Enabling hardware sequencing because some important opcode is locked. > PROBLEMS, continuing anyway > Found Programmer flash chip "Opaque flash chip" (16384 kB, > Programmer-specific) mapped at physical address 0x0000000000000000. > No operations were specified. > >
_______________________________________________ flashrom mailing list -- [email protected] To unsubscribe send an email to [email protected]
