what's the length of your cables between a programmer and a flash chip, and the overall connection quality? also I'd suggest a simpler programmer like ch341a (preferably a green PCB version), just make sure its' voltage is 3.3V
On Tue, Dec 1, 2020 at 12:29 AM Bálint Boldizsár Varga <vbali...@gmail.com> wrote: > > Dear Team! > > I got an error while librebooting my thinkpad x200. > > The error message was: > Verifying flash... FAILED at 0x0003a709! Expected=0xb8, Found=0x80, failed > byte count from 0x00000000-0x007fffff: 0x124fYour flash chip is in an unknown > state. > > I used this command: > ./flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=128 -w > /home/pi/x200/x200_8mb_deqwertz_vesafb.rom -V -c MX25L6405D > > I followed the instructions of this reddit post: > https://www.reddit.com/r/libreboot/comments/7dajn6/x200_libreboot_tutorial_for_raspberry_pi_with/ > > Should I retry the flashrom? > > Thank you in advance! > > Balint > _______________________________________________ > flashrom mailing list -- flashrom@flashrom.org > To unsubscribe send an email to flashrom-le...@flashrom.org _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
