Hallo, I try to Flash a Winbond flash chip W 25Q 128 JV output from Flashrom:
flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1000 flashrom 1.4.0 on Linux 6.12.62+rpt-rpi-v8 (aarch64) flashrom is free software, get the source code at https://flashrom.org Found Winbond flash chip "W25Q128.V..M" (16384 kB, SPI) on linux_spi. No operations were specified. flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1000 -w out.bin flashrom 1.4.0 on Linux 6.12.62+rpt-rpi-v8 (aarch64) flashrom is free software, get the source code at https://flashrom.org Found Winbond flash chip "W25Q128.V..M" (16384 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erase/write done from 0 to ffffff Verifying flash... FAILED at 0x0000548a! Expected=0xab, Found=0x2b, failed byte count from 0x00000000-0x00ffffff: 0xae Your flash chip is in an unknown state. Please report this to the mailing list at [email protected] or on IRC (see https://www.flashrom.org/Contact for details), thanks! Is the W25Q128JV supportet in flashrom 1.4.0 or is it better to use a Arch linuxwith a newer Version of Flashrom. or what is the Problem by this Message: Verifying flash... FAILED at 0x0000548a! Expected=0xab, Found=0x2b, failed byte count from 0x00000000-0x00ffffff: 0xae Greatings zuck -- Secured with Tuta Mail: https://tuta.com/free-email
_______________________________________________ flashrom mailing list -- [email protected] To unsubscribe send an email to [email protected]
