Hi Jester, I am using menubar and menu even for these you can use setdepthabove and pass a titlewindow object. I am doing this whenever I can (user selects a window from the window menu) but I cannot set this when the user clicks on the window titlebar, in those cases the window is above the menu and menubars.
Rajesh J --- In flexcoders@yahoogroups.com, "JesterXL" <[EMAIL PROTECTED]> wrote: > Popups use a depth that is usually set aside for things that are modal. > Menus' and ComboBox menus tend to go under that so already you can see the > problem. > > If you are using Menu, not MenuBar, I'm not sure but you may be-able to put > that in a PopUp too? > > ----- Original Message ----- > From: "Rajesh Jayabalan" <[EMAIL PROTECTED]> > To: <flexcoders@yahoogroups.com> > Sent: Thursday, August 18, 2005 2:53 PM > Subject: [flexcoders] Re: DepthManager > > > Hi, > > I am doing something similar now, since I am maintaining a list of > all the windows, I can go thru them and findout which one is on top > currently and use the setabovemethod. Using this sometimes windows > blackout, and the control is in a different window, and I will need to > start fresh. > > Also the menu and menubar in the application are appearing below the > windows, everytime the window is moved up by me in code (use > setdepthabove) I can set the menu and menubar above this (unneceaary > should have been the default behaviour) but I cannot control the menu > depth when user clicks on the tile of the window. > > Rajesh J > > --- In flexcoders@yahoogroups.com, "JesterXL" <[EMAIL PROTECTED]> wrote: > > There are other lower-level ways. > > > > The way I've handled in the past was to keep a member variable > pointing to > > the highest window, and then do something like: > > > > clickedPanel.setDepthAbove(highestPanel); > > highestPanel = clickedPanel; > > > > > > ----- Original Message ----- > > From: "Rajesh Jayabalan" <[EMAIL PROTECTED]> > > To: <flexcoders@yahoogroups.com> > > Sent: Thursday, August 18, 2005 1:22 PM > > Subject: [flexcoders] Re: DepthManager > > > > > > Hi Jester, > > > > I am using popupmanager to create my titlewindows.. (how do I create > > windows without them??) > > > > Regards > > Rajesh J > > > > --- In flexcoders@yahoogroups.com, "JesterXL" <[EMAIL PROTECTED]> wrote: > > > I dug back to the first message; sounds like he has a TitleWindow > being > > > created without PopUpManager, and inside a container. In that case, > > depth > > > shouldn't be a question, but rather implementation. Things in > > containers > > > can't change depth to any higher since they are in a container, and > > their > > > container's depth pretty much dictates their z drawing index on that > > stack. > > > > > > If you want to use true windows, look into PopUpManager without > > modality. > > > > > > ----- Original Message ----- > > > From: "Theodore E Patrick" <[EMAIL PROTECTED]> > > > To: <flexcoders@yahoogroups.com> > > > Sent: Wednesday, August 17, 2005 2:21 AM > > > Subject: RE: [flexcoders] Re: DepthManager > > > > > > > > > The window may be on a different branch of the display list. This > > depends on > > > the hierarchy of your MXML file and how the controls are > instantiated at > > > runtime. > > > > > > Have the window and the menu trace these values: > > > > > > trace( menu ) > > > trace( window ) > > > > > > You will see a resulting path something like: > > > > > > _level0.application.blah.blah.blah.menu > > > _level0.application.blah.blah.window > > > > > > If the two items are at the same level, then this is a depth issue. > > > Otherwise I would bet dollars to donuts that they are on different > > paths. > > > > > > My 2 Cents, > > > > > > Ted ;) > > > > > > > > > > > > > -----Original Message----- > > > > From: flexcoders@yahoogroups.com > > [mailto:[EMAIL PROTECTED] On > > > > Behalf Of Rajesh Jayabalan > > > > Sent: Tuesday, August 16, 2005 10:46 PM > > > > To: flexcoders@yahoogroups.com > > > > Subject: [flexcoders] Re: DepthManager > > > > > > > > Hi, > > > > > > > > I tried that, it does not work, the window still is showing on > top of > > > > the menu. > > > > > > > > Rajesh J > > > > > > > > --- In flexcoders@yahoogroups.com, "Theodore E Patrick" <[EMAIL > > > > PROTECTED]> > > wrote: > > > > > The method MovieClip.swapDepths accepts both a MovieClip > > instance and a > > > > > number. One potential issue with usage of Number.MAX_VALUE is that > > > > there are > > > > > not 1.79769313486231e+308 depths within the Flash Player. The > error > > > > has to > > > > > do with the input data not that swapDepths does not accept > number as > > > > input. > > > > > > > > > > Try: > > > > > > > > > > menu.swapDepths( menu.getNextHighestDepth() ) > > > > > > > > > > My 2 cents, > > > > > > > > > > Ted ;) > > > > > > > > > > > Hi, > > > > > > > > > > > > The method swapDepths accepts a UIObject as a parameter and > not a > > > > number. > > > > > > > > > > > > Regards > > > > > > Rajesh J > > > > > > > > > > > > --- In flexcoders@yahoogroups.com, "Philippe Maegerman" > <[EMAIL PROTECTED]> > > > > wrote: > > > > > > > You might try to manualy adjust your menu's depth to be > the max > > > > depth : > > > > > > > menu.swapDepths(Number.MAX_VALUE) > > > > > > > I hope it helps > > > > > > > > > > > > > > //Philippe > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > Flexcoders Mailing List > > > > FAQ: > http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt > > > > Search Archives: > > http://www.mail-archive.com/flexcoders%40yahoogroups.com > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > Flexcoders Mailing List > > > FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt > > > Search Archives: > > http://www.mail-archive.com/flexcoders%40yahoogroups.com > > > Yahoo! Groups Links > > > > > > > > > > > > -- > > Flexcoders Mailing List > > FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt > > Search Archives: > http://www.mail-archive.com/flexcoders%40yahoogroups.com > > Yahoo! Groups Links > > > > > > -- > Flexcoders Mailing List > FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt > Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com > Yahoo! Groups Links ------------------------ Yahoo! Groups Sponsor --------------------~--> <font face=arial size=-1><a href="http://us.ard.yahoo.com/SIG=12h6v3fuj/M=362131.6882499.7825260.1510227/D=groups/S=1705007207:TM/Y=YAHOO/EXP=1124415694/A=2889191/R=0/SIG=10r90krvo/*http://www.thebeehive.org ">Get Bzzzy! (real tools to help you find a job) Welcome to the Sweet Life - brought to you by One Economy</a>.</font> --------------------------------------------------------------------~-> -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/flexcoders/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/