What version of PowerSDR are you referring
to? PWSDR v1.19.3 svn 3501
What Hardware platform are you
using? Flex 3000
What Firewire driver are you using? (assuming a FLEX-x000)
3.5.0.7171
What firmware are you using? (assuming a FLEX-x000)
2004
Regards
Les VK2DSG
On 21/01/2010 6:15 PM, James Nelson wrote:
Hi Tim,
Thanks, here are my details... I just wanted to get the ball rolling
on a known issue across many SVN's, Firmware & release dating back to
pre-pal. We would like to re-visit the issue please.
What version of PowerSDR are you referring to? SVN3501
What Hardware platform are you using? Flex5000A
What Firewire driver are you using? (assuming a FLEX-x000) 3.5.0.7171
What firmware are you using? (assuming a FLEX-x000) 2.0.0.3
This is my current status, Les will contact with his details.
73'
James
--- On *Thu, 21/1/10, Tim Ellison /<[email protected]>/* wrote:
From: Tim Ellison <[email protected]>
Subject: RE: [FlexEdge] ARQ mode Problems Winmor / RFSM etc
To: "James Nelson" <[email protected]>, "flexedge"
<[email protected]>
Cc: "[email protected]" <[email protected]>
Received: Thursday, 21 January, 2010, 5:43 PM
What version of PowerSDR are you referring to?
What Hardware platform are you using?
What Firewire driver are you using? (assuming a FLEX-x000)
What firmware are you using? (assuming a FLEX-x000)
This information should always be included in a post like this
because if it isn't there is no reference point to start with.
-Tim
-----Original Message-----
From: [email protected]
</mc/[email protected]>
[mailto:[email protected]
</mc/[email protected]>] On Behalf Of
James Nelson
Sent: Thursday, January 21, 2010 1:37 AM
To: flexedge
Cc: [email protected] </mc/[email protected]>
Subject: [FlexEdge] ARQ mode Problems Winmor / RFSM etc
Hi All,
Recent excitment with the Winmor project has been the recent
catayst for looking once again closely at latencies & syncing with
data traffic and so whilst ruinning 2 gateways in our region full
time with many beta testers watching connects from myself and
others we have observed the following;
When using SDR (like pactor) I have kept the buffers both in
driver and DSP at 512. Usually the connects are 1st time however
during the connection at a random time the ack frames become
shortened or truncated hence the data frames are damaged and the
connection is lost.
What we have found using "hit and miss" experimentation is by
restarting the Psdr console "off then on" for one second or more
during the symptom described above, the synchronization for the
PTT and Audio becomes re-aligned and consequently they renegotiate
and the connection is saved. Should the power "off and on" remedy
not be actioned completion of the transfer cannot be processed
resulting in both stations simply calling it quits.
Observations would indicate an audio truncation with the PTT
timing. Having a VOX selection on the VAC in Digi U/L mode may
create a workaround but a solution to the underlying PTT & Audio
alignment problem would place our SDR's "up there" with the real
time radios thwarting the SDR latency critics. With the help of
Les Keppie VK2DSG we have been trying to solve the ARQ mystery.
Any help here Gentlemen is very much appreciated.
73'
James. VK2JN. &. Les VK2DSG
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using alpha and beta versions of the software.
