Tim's right, to run the image you need to have all antennas removed,
and a fresh database may correct the issue...
One thing that you need to protect, that is the Backup folder in the
install directory, this is the backup to the EEPROM data that was first
read from the radio. You may need it if you can't get the Image Test
to run successfully., so don't completely remove the install directory.
73,
Dudley
WA5QPZ
Tim Ellison wrote:
Are you using a clean default database with the antennas disconnected?
-Tim
-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Larry da Ponte
Sent: Friday, June 25, 2010 7:25 PM
To: [email protected]
Subject: [FlexEdge] F5K image routine fails
Flex 5K with RX2 running 2.0 beta and latest firewire on Windows 7 32 bit.
Thought I would double check the F5K prior to tomorrows field day - its been
running the beta 2.0 with no issues. I noticed this afternoon that there were
some strange images on the pan so I decided to do an RX image and level
calibration. The level calibration passed but the image calibration failed.
Rebooted and reset radio but same issue. I decided to revert the radio
firmware to the current production version and also revert the firewire and
Powersdr also to production versions (downloaded all from flex home page).
Now, running the image calibration still fails. Have unstained (rebooted),
and reinstalled a few times with no joy. Suggestions?
TRX/IO dialog error when running image calibration is:
RX Image - 80m : Failed
(-3402823000000000000000000000.0, -3402823000000000000000000000.0)
Same for other bands
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using alpha and beta versions of the software.
