Jim
IF anyone has a more correct answer for Jim, please say so - I will not be
offended and may learn a little more.
Are you using Windows? If so what version?
If it was working with 2.0.16 then it should be working with 2.0.19.
I do not know of anything that changed in the communications part of
PowerSDR
just by going to 2.0.19. (( Hey guys, it's time for someone else to step
in here - this part is beyond me))
As far as DDutil, VSPManager and Mini Deluxe goes:
DDutil - is a software program that acts as a traffic controller.
PowerSDR communicates with DDutil and DDutil communicates
with other software programs and hardware devices. DDutil does this
by using virtual serial ports. VSPManager (one of several programs) is used
to set
up virtual serial port pairs.
Mini Deluxe is a software program that allows communications
between PowerSDR and DM-780 without the need for HRD to be running.
There is one other program that is used that I did not mention. That is a
program call VAC - Virtual
Audio Cable. VAC is used to transfer audio tones (needed for PSK, SSTV
etc.) from DM-780 to PowerSDR.
So what this boils down to is that then I want to use digital (cw I think of
as being digital - you know on/off)
I have a batch file that loads several programs.
1. VAC
2. DDutil
3. PowerSDR
4. MiniDeluxe
5. DM-780
6. HDR-Logbook.
Then I'm ready to operate!!
Jim
If I can help any more I will be glad to. However keep in mind that I work
nights and tonight is my "Sunday"
Also this could take more than a single e-mail, and I would be sending
screen shots so please contact me directly
at [email protected] .
--------------------------------------------------
From: "jim" <[email protected]>
Sent: Tuesday, February 22, 2011 5:02 PM
To: "'Don'" <[email protected]>
Subject: RE: [FlexEdge] CW Decoding
Don,
Now I will show u how stupid I am
DDutil not sure
VSPManager I think is used by Flex SDR
Mini-Delux not sure what that is but I don't think I am using
It was working very good with 2.0.16 but there are changes now
with 2.0.19?
It is not my main rig so I don't use it all of the time....
Collecting more taxes than is absolutely necessary is legalized robbery.
"Calvin Coolidge" 30th Pres of U.S.A(1923-1929)
from the shack of
WB5AAA
73 de JIM
-----Original Message-----
From: Don [mailto:[email protected]]
Sent: Tuesday, February 22, 2011 3:40 AM
To: jim
Subject: Re: [FlexEdge] CW Decoding
Jim
I'm responding off the Flex site because it's not directly related to
Flex.
In cw mode I use MCW instead of the CW(KY CMD).
However my system may be different than yours.
I will help if I can. I'm wondering what other software your are using
besides PowerSDR and DM-780?
Are you using DDutil?, vspMangaer? or Mini-Deluxe?
Don
--------------------------------------------------
From: "jim" <[email protected]>
Sent: Monday, February 21, 2011 1:04 PM
To: "'Don'" <[email protected]>
Subject: RE: [FlexEdge] CW Decoding
Don,
I am new to Flex and DM780
But for some reason when I am trying to send CW from the keyboard
With Flex 3000 and DM780 it takes a long time before transmit starts
...
I am sure it is a setting
Not sure ? I have DM760 in CW(KY CMD)
Is there some information on internet on how to set up DM780 with FLEX
?
Collecting more taxes than is absolutely necessary is legalized robbery.
"Calvin Coolidge" 30th Pres of U.S.A(1923-1929)
from the shack of
WB5AAA
73 de JIM
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Don
Sent: Monday, February 21, 2011 11:54 AM
To: Gerald Tilleyi; Flex Edge
Subject: Re: [FlexEdge] CW Decoding
Gerald
Actually I'm just using DM-780 Ver 5.0 Beta build 2777. I've just
noticed
that it now seems to decode better.
I could be incorrect though, maybe conditions are just improving.
Don
--------------------------------------------------
From: "Gerald Tilleyi" <[email protected]>
Sent: Monday, February 21, 2011 9:45 AM
To: "Don" <[email protected]>
Subject: Re: [FlexEdge] CW Decoding
Hi Don,
What CW decoding program(s) are you using?
Tnx
73.
Gerald, VO1YYT
Sent from my iPad
On 2011-02-21, at 2:04 PM, "Don" <[email protected]> wrote:
HI
I was just wondering if anyone else using CW decoding software has
improved with .19?
Perhaps it's just my imagination but....... it seems to decode better
than .16.
Don
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is
used for posting topics related to SDR software development and
experimentalist who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is
used
for posting topics related to SDR software development and
experimentalist
who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
