Bill.
This are the frequencies, that can be set by right clicking af filter on
the PSDR screen for change.
I will try out your settings her.
Many thanks!
/Erik
I'm not sure what you mean about setting High and Low Frequencies.
You may already have the following settings but thought I'd pass mine along
in case it helps. Think I got the info from a Flex Knowledge Base article a
long time ago.
My settings in CWSkimmer, for 1000 Hz CW pitch freq would be;
Under the Radio tab in skimmer;
Hardware Type: SoftRock-IF
CW Pitch, Hz: 1000
Audio IF, Hz: 10000 (9000 Hz default DDS IF freq in PowerSDR + 1000 Hz CW
pitch freq)
Sampling Rate: 48 KHz (this setting doesn't seem to make any difference)
Under the Audio tab in skimmer;
Soundcard Driver: MME (my PowerSDR VAC Driver setting)
Signal I/O Device: 05 Virtual Cable 2 (my PowerSDR VAC Output setting)
Audio I/O Device: 01 SB Live! Wave Device (my soundcard)
Channels: Left/Right = I/Q
Shift Right Channel Data by: 0 samples
73, Bill
-----Original Message-----
Date: Sat, 09 Jul 2011 21:29:22 +0200
From: Erik Jakobsen<[email protected]>
To: [email protected]
Cc: [email protected]
Subject: Re: [FlexEdge] F5000A adn CWSkimmer
Message-ID:<[email protected]>
Content-Type: text/plain; charset=UTF-8; format=flowed
Hi Dudley.
I have, but thanks ;-)
/Erik
Erik,
Make sure that you have SR turned off.
Dudley
---- Erik Jakobsen<[email protected]> wrote:
Hi.
I'm setting up my Flex 5000A up to run with CWSkimmer.
I have troubles getting it to work with 1000Hz as center frequency.
If I in CWSkimmer click on the center of a CW station, the F5000A does
not move to the
1000Hz center.
What have I missed ?
Setup is as follows:
For 25Hz, the High frequency is set to 1012Hz and the Low frequency is
set to 987Hz.
That gives center at 1000Hz.
CWSkimmer's pitch is set for 1000Hz.
So are the Pitch Freq also in Flex 5000A.
73s - Erik - OZ4KK
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is
used for posting topics related to SDR software development and
experimentalist who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
