Good morning, all! I received my FlexControl via FedEx yesterday and, of course, immediately connected it. I first removed VSPmgr and assured all the virtual ports were gone, then connected the FC and it grabbed COM7, as I expected it to do. I did a reinstall of 2.2.2 so that I could tick the FlexControl box during the install routine. Also reinstalled VSPmgr. Started up PSDR and the left and center buttons lit up. Also, the FC tab at the top came to life. However, when I rotated the knob...nothing.
At least I thought it was nothing. But what actually happens is a lag of maybe 5 seconds between the knob movement and the corresponding change to the VFO. With each subsequent rotation of the knob, the responses get slower and slower until finally there is no response at all. Haven't been able to make the buttons do anything at all. Try to connect it through DDUtil but no joy there, either. In fact, DDUtil repeatedly told me that COM7 either didn't exist or couldn't be opened. Neal was kind enough to fire up TeamViewer and try to help me with this last night but to no avail. We are guessing that it is a Windows problem rather than PSDR but not sure. Everything we looked at in Windows appears nominal and, prior to this, the PC was running PSDR perfectly, even with other apps non-radio apps running concurrently. PSDR 2.2.2 Win 7/64 i5 Intel dual-core processor 4GB RAM Any and all ideas will be gratefully received and warmly appreciated. Bill _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
