Yes, some of the preamp defaults have changed in the last few PSDR versions.
However you should not have a preamp at 160M. Someone else mentioned your
database import is suspect.
It is ALWAYS better to start a new PSDR version with a factory default
database. It is time consuming to tweak all your menu items, but that is the
only way to make sure you have not imported something that is incompatible
between old & new PSDR versions.
Do a fresh database restart, spend some time resetting your menus, then once
things are right, export a few database versions, save them, and do this
exercise every few days. If you run into trouble then it's an easy thing to
restore to a known-good version which is only a few days old.
Another suggestion is to make hardcopy screen-prints of all your menu items
(when you have a fresh PSDR working well). Then when you next have to build
from a default database, you will know what menu settings you need to tweak.
he database rebuild is still a pain, but it's easier since you're following
a checklist of menu items.
73
k0dan
-----Original Message-----
From: [email protected]
Sent: November 01, 2011 11:18 AM
To: Flexedge
Subject: [FlexEdge] Low band preamp
I just recently upgraded to 2.2.3 and notice that the preamp button is
highlighted on 160m (but I can not disable it). I also noticed that the
preamp can be enabled on the BC band although reception sounds better with
the preamp off (using a loop RX antenna).
Have there been some changes in the preamp functionality for the low bands
or do I have a setting awry? I did do a database import from 2.1.x, so
maybe I messed things up.
Flex 5Ka
73, Robert KR7O/YB2ARO, DM07ba/OI52ee (ex. N7STU)
[email protected]
www.vhfdx.com (KR7O/YB2ARO homepages)
Looking for old VHF QSL cards and logbooks.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used
for posting topics related to SDR software development and experimentalist
who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
