On Mon, Mar 12, 2012 at 6:21 PM, George Allen <[email protected]>wrote:
> > Am trying to compare an external clock to the clock in the F1.5K. Looking > at the Phase (1) display, there is stationary line. > You are in the wrong mode. Make sure you are in DSB mode. Use one of the signals, probably the Rb reference, as the reference for the radio. Then phase1 will compare the phase of the unknown signal (coming in on the antenna) to the internal VFO. Since the VFO is referenced to your Rb reference, you are essentially comparing to the reference after multiplying and dividing through the DDS. Feed your crystal oscillator through to the antenna input through an appropriate attenuator. -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 [email protected] +1.767.617.1365 (Dominica) +1.916.877.5067 (USA) _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
