A very effective interim solution is to use DDUtil.   It does display this
info for 3000's and above (with colours).  It is one of the many features
that makes DDUtil such a great package.

Keith


On 4/18/12 9:34 PM, "Les Keppie" <[email protected]> wrote:

> Hi All
> You may read all comments regarding this topic at the link below
> 
> 
> 
> http://helpdesk.flexradio.com/entries/20399161-voltage-and-temp?page=1#post_21
> 268058
> 
> 
> 
> 
> After nearly 3 years of operation of my Flex 3000 - mainly using digital
> modes - I have come to believe that my radio cannot handle full tx power
> using high duty cycle modes such as Olivia  etc  - In my climate (summer
> time temps up tp 40c) the radio is not capable of cooling adequately at
> any more than approximately 30 to 40 percent of full output and even this
> level will take PA temps to 80c and  above - I now believe that it is
> imperative that the PA temp is permanently displayed on the GUI and not
> require operator intervention to display it     Surely it is just a small
> request to have this displayed when one considers the visual benefits of
> having it displayed with a colour code to indicate critical temperatures
> Owners  Manual  version 1.18.0 states  as follows---- The keyboard
> combination of Ctl-Shift-I will display the voltage and temperature.
> Clicking on the temperature will alternate its value between Celsius or
> Fahrenheit.   Either value may be displayed against a yellow or red
> background indicating levels of critically -----  I HAVE NEVER -EVER -SEEN
> THIS FEATURE WORK - Certainly would be nice to see the powers that be
> relent and accede to this request
> 
> 
> Les VK2DSG

-- 
Keith Goobie
[email protected]
Richmond Hill, Ontario



_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It is used for 
posting topics related to SDR software development and experimentalist who are 
using beta versions of the software.

Reply via email to